99.95% HIGH PURITY TRANSLUCENT POLYCRYSTALLINE ALUMINA CERAMIC TUBE ROD No.: 42

$22.00 Buy It Now 27d 9h, Click to see shipping cost, 30-Day Returns, eBay Money Back Guarantee

Seller: advancer53 (3,232) 100%, Location: Baldwinsville, New York, Ships to: Worldwide, Item: 301069286796 HIGH PURITY TRANSLUCENT POLYCRYSTALLINE ALUMINA CERAMIC TUBES ROD ANTENNA INSULATOR No.: 42You are buying ONE (1) only of a High Purity Translucent Poly Crystalline Alumina Ceramic Tube. It is in excellent condition being NOS (New Old Stock). They are made from 99.95% purity Aluminum Oxide (Al2O3) which of course is Alumina. Generally the balance of composition for this purity Alumina material is of Magnesium Oxide (MgO) which is Magnesia. This material has very high hardness, very high stiffness, very good corrosion resistance to chemicals at high temperature, most specifically it is resistant to attack from molten Sodium, and it has very high refractory ness or use temperature. It is also very durable having even better mechanical strength properties than other high purity alumina materials. It has better thermal shock resistance as compared with other alumina materials as well. This is realized through its more uniformly controlled grain size which is required to provide the necessary optical translucency. They may be used for a variety of electrical, mechanical, and thermal applications. They may be used as setter plates for firing parts in a kiln. The may be used for high temperature furnaces and as high temperature refractory turntables. They may be used optical site tubes for taking readings of very high temperatures. They may also be used for jewelry or for applications requiring high wear or abrasion resistance. They may be used for making high pitch resonance chimes. Your imagination is the only limiting factor in the spectrum of possible applications for this component. Be sure to view all photos as they are an integral component of the item description. NOTE: There is an end washer at each of the tube extremes. The ends may be cut off id the large ID is desire for use. Please Note: There are visually discernible differences in any or all of the dimensions. These are not precision technical ceramic components. There is no warp or camber Specification for this item. However they are relatively flat. There may also be “firing” color variations inherent in the material. The thermal shock resistance is not very high so exercise rule of thumb caution. “The larger the piece of material the slower the rate of temperature increase should be applied to the piece.” Heat up slowly to avoid cracking in use. The specifications for these components are as follows: Outside Diameter: Approximately 0.3934 (10 mm) Inside Diameter: Approximately 0.315” (8mm) Inside Diameter of End Washer: Approximately 0.120 (3 mm) Length: Approximately 9.750” (245 mm) Specific Gravity or Density: 3.99 g/cm3 Water Absorption or Porosity: 0% Fusion Temperature or Melting Temperature: 2040 °C or 3686 °F Maximum Working Temperature: 1950 °C or 3542 °F Thermal Conductivity: 30 W/m* K Specific Heat: 0.9 J/g*K Expansion Coefficient or CTE: 7.5 x 10 E-6 inches/°C Electrical Resistivity at 20 C: 10 E14 Ohm*cm Electrical resistance at 600 C: 10 E8 Ohm*cm Modulus of Elasticity: 45 x 106 p.s.i. or 350 GPa. These components were not specifically manufactured for an individual application; therefore be sure to check the dimensional descriptions carefully for your application. Future returns or requests for refunds, because of some "fit" issue or the like will not be honored. Please check the other component variants that are available in my listings for the model or models that best fits your requirement. Your imagination is the only limiting factor in the spectrum of possible applications for these components and materials. If you require additional technical information, design, or application engineering consultation, feel free to contact us. As a materials scientist with four decades experience in high temperature processing, ceramics, dentistry, and jewelry manufacture it will be possible to provide you with creative and imaginative approaches to your requirements. Feel free to ask any questions you may have regarding this item early. Use PayPal only. Combined shipping discount is provided for multiple item purchases. For best results, please be sure to shop using cart, then complete the paying transaction when you are satisfied that all the items you need are in the cart. Items purchased separately will be shipped separately as a unique transaction. Please complete payment transactions within 3 days. Items are generally shipped via USPS first class mail with delivery confirmation. Ask about shipping costs to your country. Feedback is provided for all buyers. We will appreciate yours as well. We strive to maintain excellent customer service; and are able to solve virtually any issues you may have. Every effort to provide the most accurate information about this item and every appropriate precaution in packaging this item is made, to assure that your highest expectations and satisfaction are met, and are exercised to meet this requirement for excellence. In winning this auction or purchasing this item you are agreeing that you will first provide the seller every opportunity to provide redress or resolution to any issues you many have concerning this item, prior to leaving any negative feedback about the seller or the item. No.: 42 Condition: New – Open box, Condition: In excellent condition, Brand: Advanced Ceramics, Model: PCA, MPN: N/A, Country of Manufacture: United States

PicClick Insights PicClick Exclusive
  •  Popularity - 9,228 views, 4.4 views per day, 2,103 days on eBay. Super high amount of views. 108 sold, 92 available.
  •  Price -
  •  Seller - 3,232+ items sold. 0% negative feedback. Top-Rated Seller! Ships on time with tracking, 0 problems with past sales.
Similar Items