90 5nm 1W 100μm Aperture C-Mount Laser Diode |
Description: This is a 905nm laser diode, which can output 1W optical power from its 100μm aperture. It was bonded on C-Mount, which was made in the USA. It came to us with a lot of other electronic/opto-electronic related surplus. We have 2 such lasers in stock. The lasers are brand new not used. |
Specifications:
Characteristics |
Specification |
905nm 1W C-Mount Laser Diode | |
CW output power (W) |
1.0 |
Peak wavelength (nm) |
905 ± 5 |
Spectral width (nm) |
≤ 4 |
Threshold current (A) |
≤ 0.4 |
Operating current (A) |
≤ 1.6 |
Slope efficiency (W/A) |
≥ 0.9 |
Beam divergence θ∥ × θ⊥ (deg.) |
8/30 |
Wavelength temperature coefficient (nm/℃ ) |
0.3 |
Emitting area (μm) |
100× 1 |
Lifetime(hour) |
>10,000 |
Package |
C-Mount |
Data Sheet |
Available for each diode |
By Bidding, you must agree and accept:
· You are over 18 years old and understand the dangers and risks of laser use, and will use this component responsibly.
· You will use this component in a legal, safe manner to ensure audience and personnel safety.
· You have a working knowledge of laser diodes. You understand ESD, and the static sensitivity of this component.
· Laser beam is harmful for eyes during process. Please avoid any directly see on the aperture. Never shine laser beam on human or animals.
·
You accept these diodes
as electronic components for integrating them into a system designed by
yourself. You relieve the SELLER, and E-bay from any and all LIABILITY from
damage or injury that may arise from use of this laser.
If you are not serious, please do not place a bid.
Return policy:
· We will test the lasers before shipment; buyer should contact us as soon as he find it is defective;
· Refund request should be made within 14 days buyer receives the product;
· Replacement request should be made within 30 days buyer receives the product;
· Since this is a Do-It-Yourself laser diode, we only refund if the product arrive to be defective; so please use it gently and properly when you assemble your device; you also need to send back in original shape to get refund/replacement; we won't refund or replace if the laser was damaged by buyers;
Some tips for operating laser diode:
· Please use a power supply with stable output. Transient current spikes should be avoided.
· Please always connect the pins correctly.
· Heat sink with good thermal dissipation is required for holding the laser otherwise the laser will be burned.
· Please use eye protection when you operate the laser.
· It is better to wear an antistatic wrist band.
· You should always start with current well below the diodes maximum (about 1.6 amps in this case).