50W CO2 Glass Laser Tube Metal Head 800mm For Laser Engraving Cutting Machine

Sold $131.99 Buy It Now, $8.99 Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: twbangg7 ✉️ (29,168) 95.8%, Location: Alloway, New Jersey, US, Ships to: US, CA, Item: 253436615946 50W CO2 Glass Laser Tube Metal Head 800mm For Laser Engraving Cutting Machine.

Similar Items Laser Tube Metal Head Glass Pipe For CO2 Engraver Cutting Machine 60W 1200MM USD:228.99    

Description

Please add this item to your watch list so that you can receive price update about it via email.
Here is how:
Click the Add to Watch List button under the Place bid or Buy It Now button.

Name:50W 800mm metal head CO2 laser tube for laser engraving machine
Model:589062
Specifications:
Material:Hard glass+metal head
Length:800mm
Diameter:50mm
Power:50W

CO2 laser tube is mainly used for laser engraving machine, laser marking machine,laser engraving machine, laser cutting machine, is the core component light,and can be carved and cut acrylic, cloth, leather, bamboo, wood, engraving, etc.

Features:
This is mainly made of hard glass, the cavity, the electrode composed of three parts.
1.  Hard glass p  art ; the part for  med by firing into the discharge tube GG17 material, water-cooled jacket, storage units and back to the trachea and components. Sealed-off CO2 laser is typically three pipe structure. Innermost discharge tube, the middle is the net water jacket, the outermost layer is the gas storage units, return pipe is used for communicating and gas discharge tubes.
2. Cavity parts : the part formed by totally reflecting mirror and output mirrors. Full-mirror cavity generally with optical glass substrate, the surface crossing the gold film, gold film mirror reflection over 10.6um near 98%; output mirror resonator generally use infrared radiation transmissive material 10.6um germanium (Ge) as a base, crossing above the dielectric multilayer film made.
3. Electrode portion : CO2 lasers generally use cold cathode is cylindrical in shape, the choice of the cathode material has a great influence on the life of the laser, the basic requirements for cathode materials are: sputtering rate, small gas absorption rate, commonly used metals material nickel

How to use it:
1.Line first electrode connected, (+, -) Do not pick the wrong pole.
2.Cooling water pipe connected, the water connection from the anode, cathode and down into the water on the principle meet, and the interface is not leaking. Must store enough water in the water before use, must weather bubble through water in the water-cooled pipe before use (before use each time you have to look).
3.Automatic detection devices are recommended to join in the net but the laser tube water system to prevent the laser tube without water while at work due to overheating fault

Troubleshooting:

First, the moment is not deep:
1.Cut is not deep: check the supporting point of the laser tube is reasonable, whether the light intensity is set too small, the optical path is offset, the focal length is correct, whether ytterbium sheet surface scratches and dirt, if the flow of cooling water flow pressure normal , no more than a few problems on check light outlet lens inside the laser tube for scratches and dirt, if you are normal, then it is the laser tube itself, the quality problem.
2.Emitting a while before the moment is not deep: this problem is to test the support point of the laser tube is reasonable, the water temperature exceeds 30 degrees, the lens is heat at work, whether the flow of cooling water flow pressure is normal, if the cooling water clean, above normal then check the laser tube

Second, the high voltage ignition and discharge:
1.Check around the high pressure head there and moist dirt away from the metal part of the machine is too close; the other is the laser power high-voltage connector device is falling from the seat, and whether an internal high-voltage connector device disconnection and destruction. If above normal, then so is the quality of the laser tube itself is a problem.

Third, the laser tube broken, cracked, water head off:
1.Water temperature is controlled in the range of 25 ℃ -30 ℃, the cooling water can not ice cold regions, especially after laser shutdown, may not allow the cooling water retention in the laser tube.
2.Whether luminous work under the control of the water protection; (test will not be as luminous water off and emit light or not)
3.There are no water pipes will fight the demolition of the phenomenon.
4.Whether there will be bubbles within the laser tube.
5.Water pressure is normal; if the direction of flow low prices.

Package include:
1 x 800mm Laser Tube


 

Payment

1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.

Shipping

1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2.Items will be shipped within 1-3 business day when we received payment.
3.Delivery time depends on destination and other factors;
4.International buyers please note:
  a.Import duties, taxes and charges are not included in the item price or shipping charges. These charges are buyer’s responsibility. We will try our best to reduce the risk of the custom duties.
  b.Please check with your country's customs office to determine what these additional costs will be prior to buying.

 


On Feb-21-18 at 13:30:45 PST, seller added the following information:

 

 

  • Condition: New
  • MPN: rMp589062
  • Brand: Unbranded/Generic
  • Material: Hard glass+metal head
  • Length: 800mm
  • Diameter: 50mm
  • Power: 50W
  • Manufacturer Part Number: rMp589062
  • UPC: 6926646717901

PicClick Insights - 50W CO2 Glass Laser Tube Metal Head 800mm For Laser Engraving Cutting Machine PicClick Exclusive

  •  Popularity - 6 watchers, 0.1 new watchers per day, 59 days for sale on eBay. Super high amount watching. 6 sold, 7 available.
  •  Best Price -
  •  Seller - 29,168+ items sold. 4.2% negative feedback. Good seller with good positive feedback and good amount of ratings.

People Also Loved PicClick Exclusive