Remember these are NAME BRAND stepper motors made for heavy industry,
NOT the cheap non-name brand made for retail China stepper motors that heat up, make lots of noise and don’t last.
CNC ROUTER ROBOT REPRAP MAKERBOT
You get 5 motors
NEMA 17
Sanyo Denki
STEPPER MOTOR, 1.8 deg 200 steps/rev when full-stepping PIN1 /black =B-
PIN2 /white = common
PIN3 / orange = B
PIN4 / yellow = A PIN5 / blue = common
PIN6 / red = A
Better performance!!! with the mounted damper, it is ideal for applications where motor noise and vibration need to be minimized,
such as in security camera controls, sample movement systems in analytical instruments or in marking engraving machines, repraps, markerbots etc.
Description
1.6 or 2.0 ohm motors
I have had RepRap owner state to me that they run these at 12 volts and .8 to 1 amp.
External Depth: 39mm External Length / Height: 42mm External Width: 42mm Frame Size: 17 Holding Torque: unipolar 42.48 oz/inch (0.3N-m) bipolar 59 oz/inch (.42N-m)
Pulley: pitch 2, 15 teeth.
Note: Motor could have purple or colored wires
They’re in very good cosmetic condition, and were removed from working equipment.