Dental Light Cure Universal Composite Resin/ Etching Gel/ Bonding Adhesive

$6.72 Buy It Now, FREE Shipping, 60-Day Returns, eBay Money Back Guarantee
Seller: dentaljoy ✉️ (9,583) 99.7%, Location: Fullerton, California, US, Ships to: US, Item: 225590532127 Dental Light Cure Universal Composite Resin/ Etching Gel/ Bonding Adhesive.
 
     
    •  

Bonding Adhesive

Describe

This product is a one-component liquid, and its main ingredients include UDMA and other multifunctional methacrylic resins. It does not contain solvents and inorganic fillers, and is safe and harmless to the human body. The product is a light-curing adhesive material, which is clinically used for the bonding of dentin and enamel. Suitable for bonding resin materials and ceramic materials.

Scope of application

Used for bonding dentine and enamel with resin and ceramic materials.

Clinical operation steps:

  1. Pretreatment of caries and pulp protection.
  2. Use 37% phosphoric acid etchant for treatment, then clean it thoroughly with water, and dry it thoroughly with an oil-free air gun.
  3. Apply a layer of adhesive evenly on the tooth surface with a small brush.
  4. Make the adhesive layer even as far as possible with the wind power of the air gun.
  5. Irradiate with an oral light curing light source of 300mW/c㎡ for 20 seconds to cure the adhesive.
  6. Please use the composite resin filling material according to the original manufacturer's instructions, as well as the subsequent grinding and reconstruction processes.

Precautions

1. During clinical use, the lip and adjacent teeth should be well isolated and protected. Avoid contact with eyes, mucous membranes and skin.

2. Phenols, clove oil and zinc oxide can not be used as the bottom material of the first layer,because clove oil contains polymerization inhibitor "phenolic substances", which will directly affect the degree of polymerization of the adhesive.

3. During the curing operation, the distance between the surface of the light curing lamp and the adhesive should be kept below 2mm, but it should not be in contact with the material.

4. Before applying adhesives and composite resin fillings, the tooth treatment surface should avoid contamination by water and other impurities.

5. It is not suitable for pulp capping, and patients who are allergic to resin should not use it.

Environment

This product is operated at room temperature.

Storage Conditions

This product should be stored in a cool and dry place at 2°C~28°C, avoiding direct sunlight.

Shelf Life

This product is valid for 2 years, please do not use expired product.

Contraindications:

Patients with a history of allergy to methacrylate resins are contraindicated.

 

 

Important Notice:

We have color of A1, A2,A3, A3.5, B1

Specifications:

* Universal composite for anterior/posterior dentine and enamel
* High radiopacity
* Fluoride release
* High strength (compressive strength>480MPa)
INDICATIONS FOR USE:
* Direct anterior and posterior restorations
* Compatible with glass ionomer resin material
* Cup buildup
* Core buildup
* Indirect anterior and posterior restorations including inlays, onlays and veneers

   Acid Etching Gel 37% Phosphoric    

FEATURE

1.  Enamel and dentin etching.

2.  Apply special technology to obtain ideal density of the gel.

3.  Gel in blue color for better visual management.

Indication: It is used for acid etching of tooth enamel and dentin before dental repair.

Operation Procedure

1. Remove surface dirt, rinse the prepared cavities, and blow dry.

2. Apply the etching agent from the tooth enamel to the entire surface of the repair, and etch for 20-40 seconds. The acid etching time of deciduous teeth and dental fluorosis can be extended appropriately according to the actual situation.

3. Rinse with clean water after acid etching, and suck out in time.

4. Use adhesives and resins for bonding repair.

 

Dental Light Cure Lamp Cordless metal head LED 1S Dental Curing Light


Product Description
Parameter:
Wavelength:440-480nm
Light power:5W
Intensity:800-1400mw/cm²
Battery:Li-on 800mAh
Input voltage:AC100-240V, 50/60Hz 0.4A Max
Output voltage:DC 5V/1.5A
Net Weight:155g
Mode selection:P1, P2, P3
Solidification time:1S,3S,5S,10S,15S,20S

Features:
·Produce the maximum light intensity safely.
· A high intensity of 1400 mW/cm2.
· Offers extremely short curing times of no more than 3 seconds.
· Cordless, highly portable and light weight (only 155g).
· High-performance Li-ion battery technology.
· LED panel conveniently indicates a countdown curing time.
· Battery can be fully recharged in 90 minutes.
· Battery with protection against over-voltage, over-current and short circuit.
· 3 versatile curing modes for every indications.
· Automatic power off, low battery alert.
· Color : White .

Operation conditions:
1.Storage Condition: Temperature: +10℃+40℃
2.Humidity: 30%-75%
3.Atmospheric pressure: 70KPa-106Kpa
4.Environment Conditions: Not near from fire equipment or flammability material.

Packing list:
The host * 1
Metal lamp holder *1
The silicone base *1
Power adapter *1
Disposable protective sleeve *1
Shade plate *1
Product specification *1

FDA Statement

 

The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you can bid on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.

Seller name:dentaljoy

City,State:SHENZHEN,China

Telephone number:0755-67530378

 

Statement:The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. So you can bid it on this item only if you are an authorized purchaser. If the item is subject to FDA regulation,We have to verify your status as an authorized purchaser of this item before shipping of the item. Thanks for your understanding!

Payment
We only accept paypal payment,it is easy and safe. and for any other payment forms,please kindly contact us in advance.

Shipping
The goods you odered will be posted out in the second working day after the paymet has been made. (We will inform you via email if any delay occured due to holiday events.

General shipping time is between 7-12 working days. (After the shipping started, the order will be monitored and the track of the item will be posted on paypal)

Contact Us
If you have any query or dissatisfaction, please contact our customer service via eBay Message Center only.

If you contact us via eBay message, we'll reply you within 24 working hours.

Thank you so much for your purchase. Wish you have a nice day! : -)

 

                                                                                          
 
 
  • Condition: New
  • Model: Acid Etching Gel 37%
  • Brand: Unbranded
  • Product: One-Step Bonding Adhesive
  • MPN: SZ1620002001
  • Country/Region of Manufacture: China
  • Intended Use/Discipline: Dental Laboratory, Dentistry

PicClick Insights - Dental Light Cure Universal Composite Resin/ Etching Gel/ Bonding Adhesive PicClick Exclusive

  •  Popularity - 21 watchers, 0.1 new watchers per day, 309 days for sale on eBay. Super high amount watching. 36 sold, 10 available.
  •  Best Price -
  •  Seller - 9,583+ items sold. 0.3% negative feedback. Great seller with very good positive feedback and over 50 ratings.

People Also Loved PicClick Exclusive