Specifications:
Part 1: CNC Motion Controller DDCS V3.1
Standalone Motion Controller;
16 opto isolated digital inputs, 3 opto isolated digital outputs
Analog spindle control 0-10V spindle control (can be modified as PWM output);
3 axis motor control, max 500 KHz per axis;
ARM9 main control chip;
FPGA core algorithm chip;
4.3 inches TFT screen, resolution ratio: 480x272;
17 operation keys;
18V-32V power input, minimum 0.5A;
USB flash disk supports for G code file input;
1GB internal memory;
MPG port for our MPG with digital display. Many other MPGs also supported;
Jog function for each axis (continuous, step, defined distance;
Support the operation of quickly specifies the running position;
Support for “Power Cut” recovery. Data is automatically saved.
Part 2: 6 Axis CNC Machine MPG Pendant DDMPG-31
Description:
DDMPG-31 is the dedicated version for.
Features:
Model: DDMPG-31 (Only could work with DDCSV3.1)
Axis: up to 6 axis
Adopt high quality hand wheel pulse, 12mm knob cap, feel good.
Comes with emergency button
Interface type: DB15 male, standard interface, convenient and efficient.
Step unit setting: X1 (0.001), X10 (0.01), X100 (0.1)
Material: ABS
Net weight: 600 g
Dimension: 17 x 7.1 x 3.8 cm
Line length: Flexible, up to 2 meters
Installation method: Directly connect the DB15 female port of the MPG on the device
Part 3: 2 Phase Hybird Stepper Motor Driver FMD2740C
Specification:
Chopper mode: Bipolar constant current
Optocoupler signals: isolated input signal high-speed optocoupler.
Chopping frequency: 20 KHz
8 kinds Subdivision precision: 1,2,4,8,16,32,64,128 choosable
The maximum drive current: 4A
Applicable motor: can drive any 2-phase or 4-phase hybrid stepping motor, which phase current should be 4A or below.
Input signals: TTL compatible
When stationary, the current is automatically reduced by half
Exterior design science, easy to install
Part 4: 2-phase NEMA23 hybrid stepper motor 57HM76-2804
Feature:
Step Angle:0.9°
Motor Length:76mm
Rate Voltage:3.2V
Current/Phase:2.8A
Resistance/Phase:1.13Ω
Inductance/Phase:5.6mH
Holding Torque:18kg.cm
Number of Leads:4
Detent Torque:680g.cm
Rotor Inertia:480g.cm
Part 5: 360W Switching Power Supply
Feature:
Input Voltage: AC110V/220V, Switchable
Output Voltage: DC 12V/15V/24/36/48V/60V
Output Current: 0~10A
Net Weight: 800gram
Dimension: 220*115*50mm
Shell Material: Metal case / Aluminum case
Safety Compliance: CCC / Rohs
High price-effective, reliability with industry standards
Built-in over voltage, over current and short circuit protection
Working Temperature: 0~40C
Storage Temperature: -20~60C
Ambient Humidity: 0~95% Non-Condensation
Part 6: 75W 24VDC 3A Single Output Mini Switching Power Supply
Parameter:
DC output voltage: DC 5V / 12V / 15V / 24V
AC input voltage range: 100~240VAC 47~63Hz
Input current: 1.6A/115VAC, 0.8A/230VAC
Overload protection: 105%~150% Shut off current, could automatically restore
Weight: 0.3 KG
Part 7: Auto Z Touch Plate
Product Specifications:
Size: 1.38”x0.79” / 3.5cm x 2cm (DxH)
0.98” / 25mm top surface diameter
Cable length 49.21” / 125cm approx. (including alligator clips)
Part 8: Proximity Sensor Switch
Features:
Type: DC 3-wire NPN NC
Theory: Inductance Sensor
Output: Switching Transducer
Sensing Distance: 4mm
Working Voltage: DC 10-30V
Response Frequency: 500Hz max
Indicator: Yellow LED
Size: 18 x 18 x 3mm/ 0.7" x 0.7" x 1.5" (W*H*L)
Cable Length: 1.2M
Hole Size: 0.8 x 0.3cm/0.3" x 0.1"(L*W)
External Material: ABS Resin
Net Weight: 69g
Part 9: Single Phase DC to AC Solid State Relay Module
Features:
Input voltage: 3-32V DC
Output voltage: 24-380V AC
Output current: 40A
Trigger Current: 7.5mA / 12V