3Inch Vise Milling Drilling Machine Clamp Vice For CNC Milling Precision Vise

Unsold $54.66 Buy It Now or Best Offer, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: yibei-tech ✉️ (28,018) 99.3%, Location: Monroe Township, New Jersey, US, Ships to: US, Item: 256051668452 3Inch Vise Milling Drilling Machine Clamp Vice For CNC Milling Precision Vise.
  • Description:
  • Dimensions Jaw Width: 3"
  • Jaw Opening: 2.95"
  • Jaw Height: 1"
  • Weight: 13 Lbs
  • Accurate to 0.002” per 4” on squareness and 0.006” per 4” on parallelism without base
  • Vise Key: 11.11mm table slot width, 12.00mm base width
  •  
  • Product features
  • Each pound of force in horizontal induces 1/2 lb of downward force, eliminating jaw tilt. This Vise is so designed that the horizontal force generated by tightening the handle pushes the semi-sphere within the movable jaw and thus thrusts the movable jaw downward. The workplace does not move up, even if it is held at the top of the jaw plates. 

    3Inch Vise Milling Drilling Machine Clamp Vice For CNC Milling Precision Vise

    Description:

    Dimensions Jaw Width: 3"

    Jaw Opening: 2.95"

    Jaw Height: 1"

    Weight: 13 Lbs

    Accurate to 0.002” per 4” on squareness and 0.006” per 4” on parallelism without base

    Vise Key: 11.11mm table slot width, 12.00mm base width

     

    Product features

    Each pound of force in horizontal induces 1/2 lb of downward force, eliminating jaw tilt. This Vise is so designed that the horizontal force generated by tightening the handle pushes the semi-sphere within the movable jaw and thus thrusts the movable jaw downward. The workplace does not move up, even if it is held at the top of the jaw plates. 

    Highest clamping power. It's very accurate and durable

    Sliding surface of the vise bed is flame hardened and ground

    Vise bed is made from grey cast iron and the maximum tensile strength of the vise bed is 28,000 PSI

    With anti-jaw lifting mechanism. K type angle lock nut is made from the highest quality ductile Iron, firm and durable

    Acme screws and easy to read 0-360 deg scales

    Screws from the top through the jaw make the vise more stable and durable. Taiwan new type

    Four setting positions of the jaw plates are available, widening the jaw plates opening.

    Payment

    1.We currently only accept payment through PayPal.
    2.Payment must be made within a few days after the auction/bid ends, or eBay will open Unpaid Item case automatically .

    Returns

    Make sure items fit your vehicle. For Part & Accessories items please verify the Part Number and Size carefully. And make sure the item will fit your vehicle.
    If you are not sure whether it will fit or not please contact us via eBay Message before buying.
    If you received an item which is NOT fit for your vehicle please contact us .

     

    Delivery details

    Items will be shipped to your eBay address within one business day when we receive full payment.
    We ship to the worldwide with USPS or Fedex . Our warehouse is located in California .

    Terms of sales

    1. We leave Postive feedback to all our customers. If you satisfy with your item ,please leave us a postive feedback ,we are very appreciated .
     
    If for any reason you are not satisfied with the purchase, Please Do Not Leave Negative Feedback Before Contacting us .We will work hard to make it right and make you satisfied .


    2. Return

    If the item arrives to you in a non-working condition or "not as described",please contact us through ebay's "Contact Seller" message system .

     

    Contact Us

    CONTACT US via eBay Messages.
    Any Question please contact us via eBay Messages.
    Customer service will respond to you within 24 hours.
    Thank you for your business!

    Carburetor Search Store
    Top Seller

    Shop Category  Store Home  Suspension & Steering  Lighting & Lamps  ◈  Fog Lights  ◈  Tail Lights  ◈  Xenon Headlight Ballast  ◈  Headlight  ◈  Fog Lamps cover  ◈  Turn Lights  ◈  Brake Lights  ◈  Truck Light Strip  ◈  Moto Lighting & Lamps  ◈  Others  Carburetor  ◈  Lawn Mowers Carburetor  ◈  String Trimmers Carburetor  ◈  Blower Carburetor  ◈  Snow Blower Carburetor  ◈  Saw Carburetor  ◈  Tractor Carburetor  ◈  Motorcycle Carburetor  ◈  ATV Carburetor  ◈  Automobile Carburetor  ◈  Others  ◈  rebuild kit  ◈  gasket  ◈  Intake Manifold Boot  ◈  Golf Carburetor  Boat  ◈  Steering Shaft Pin  ◈  Yacht Light  ◈  Others  Auto Valve  ◈  Pressure Relief Valve  ◈  Air Idle Valve  ◈  Transmission Solenoids  ◈  Control Valve  ◈  Valve Body  ◈  EGR Valve  ◈  Selector Valve  ◈  Others  Motorcycle Valve  ◈  Motorcycle Solenoid Valve  ◈  Motorcycle fuel Switch Valve  ◈  Others  Module  ◈  Transmission Control Module  ◈  Headlight Driver Module  ◈  Fan Control Module  ◈  Voltage Converter Module  ◈  Others  Fule Injector  Brakes & Brake Parts  ◈  Brake Master Cylinder  ◈  Clutch & Clutch Parts  ◈  Motorcycle Hand Brake Handle  ◈  Motorcycle Brake Cable  ◈  Motorcycle Brake Pads  ◈  Others  Car Repair Kit  Auto Engine System  ◈  Valve Cover & Gasket  ◈  Oil Cooler  ◈  Engine Timing Cover  ◈  Turbine Cover  ◈  Machine Oil Can  ◈  Glow Plug  ◈  Filter Housing &Accessories  ◈  Oil Scale  ◈  Others  Auto Ignition System  ◈  Spark Plug  ◈  Car Ignition Coil  ◈  Spark Plug Protective Cover  ◈  Ignition Switch  ◈  Car Ignition Module  ◈  Others  Auto Hub  ◈  Locking Hub  ◈  Hub Bearing  ◈  Wheel Spacers Adapters  ◈  Others  Motorcycle Ignition System  ◈  Motorcycle Ignition  ◈  Motorcycle Ignition Coil  ◈  Motorcycle Fuel Switch  ◈  Motorcycle Hand Plate  ◈  Motorcycle Ignition Switch  ◈  Motorcycle Starter Fitting  ◈  Motor Electromagnetic Starter  Motorcycle engine system  ◈  Piston Cylinder Fittings  ◈  Camshaft  ◈  Others  Auto Actuator  ◈  Air Conditioner Actuator  ◈  Door Lock Actuator  ◈  Hood Catch  ◈  Clutch Actuator  ◈  Fuel Door Opener Actuator  ◈  Others  Auto Motor  ◈  Transmission stepper motor  ◈  Transfer Case Gear Motor  ◈  Blower Motor  ◈  Blower Resistor  ◈  Others  Auto Inlet & Outlet System  ◈  Air Filter  ◈  Intake Exhaust Valves  ◈  Throttle Body  ◈  Power Brake Booster  ◈  Exhaust And Intake Pipes  ◈  Turbocharger  ◈  Others  Auto Circuit Wiring Harness  ◈  Positive Battery Cable  ◈  Sensor Harness  ◈  Body Wiring Harness  ◈  Gear Shift Control Cable  ◈  Battery Terminal  ◈  Carplay  ◈  Others  Transmission System  ◈  Chain  ◈  Shaft  ◈  Gear  ◈  Tensioner  ◈  Belt  ◈  Steering Power Hose  ◈  Others  Auto Switch  ◈  Door Power Window Switch  ◈  Neutral Safety Switch  ◈  Combination Lever Switch  ◈  Parking Brake Switch  ◈  Others  Motorcycle Control System  ◈  Gearbox Shift Line  ◈  Rectifier  ◈  Relay  ◈  Voltage Regulator  ◈  Thumb Oiler  ◈  Others  Auto Sensor  ◈  TPMS Sensor  ◈  Mass Air Flow Sensor  ◈  Oxygen Sensor  ◈  Knock (Detonation) Sensor  ◈  Air Pressure Sensor  ◈  Throttle Position Sensor (TPS)  ◈  Vehicle Speed Sensor  ◈  ABS Wheel Speed Sensor  ◈  Fuel Pressure Sensor  ◈  Crankshaft Position Sensor  ◈  Oil Pressure Sensor  ◈  Camshaft Position Sensor  ◈  PDC Sensor  ◈  MAP Sensor  ◈  Exhaust Pressure Sensor  ◈  Others  Motorcycle Pump  ◈  Fuel Pump  ◈  Brake Calipers  ◈  Others  Auto Interior  ◈  Plastic Rivets Fasteners  ◈  Trunk Shield  ◈  Sunroof Sunshade Corn  ◈  Armrest Center Box Cover  ◈  Cup Holder  ◈  Inside Door Handle  ◈  Inner Door Panel Handle  ◈  Cigarette Lighter  ◈  Storage Box  ◈  Air Conditioner Vent  ◈  Others  ◈  Seat Covers  ◈  Floor Mats  Exterior Trimming Parts  ◈  Roof Rack  ◈  Running Boards/Side Steps  ◈  Bmuper Grille  ◈  Fender Flares  ◈  Door Handle  ◈  Fuel tank cap  ◈  Hinge  ◈  Front Bumper  ◈  Rear Bumper  ◈  Motorcycle Decoration  ◈  Others  ◈  Window Visors  ◈  Windshield Wiper Blades  ◈  Front bumper trim  ◈   Auto body trim panel  Auto Pump  ◈  Fuel Pump  ◈  Water Pump  ◈  Air Pump  ◈  Power Steering Pump  ◈  Clutch Master Cylinder  ◈  Oil Pump  ◈  Others  Business & Industrial  ▷  Industrial Control Module   ♢  Control Valves   ♢  other  ◈  Others  ▷  CNC   ♢  Edge finder   ♢  Drill Bits   ♢  Spring Collet   ♢  Boring Bar   ♢  Mandrel   ♢  Collet Chuck   ♢  Pull Stud   ♢  Quick Change Tool Post   ♢  Drill Chuck   ♢  Drill Chuck Arbors   ♢  Live center   ♢  Vise   ♢  Milling Arbor   ♢  Reamer   ♢  Blocks   ♢  Other  ▷  Hand Tools   ♢  Rivet Gun   ♢  Wrenches   ♢  Hydraulic Crimper   ♢  Balance Level   ♢  Drill Bits   ♢  Outside Micrometer   ♢  Casters   ♢  Steel Tape Measure   ♢  Other  ▷  Metalworking Supplies   ♢  Sanding Disc   ♢  Metal Cut Off Wheels   ♢  Flap Discs   ♢  Hose Clamp   ♢  Welding Wire   ♢  Cable   ♢  Piston Driver   ♢  Other  ▷  Generator Accessories   ♢  Automatic Voltage Regulator   ♢  Generator Carburetor   ♢  Other  Home & Garden  ▷  Yard, Garden & Outdoor Living   ♢  Lawn mower parts  ◈  Others  Radiators & Parts  Car tools  ATV&UTV Parts  ◈  ATV&UTV Suspension System  ◈  ATV&UTV Brake System  ◈  ATV&UTV Pump  ◈  ATV&UTV Carburetor Parts  ◈  ATV&UTV Lighting System  ◈  ATV&UTV Body&Frame  Motorcycle Parts  Special Vehicles & Boats  Other Hot Item
    Carburetor Repower Maintenance Kit For ECHO GT-225 PE225 SRM225 For ZAMA RB-K93
    USD 13.88
    Carburetor Set for Briggs & Stratton V-Twin 20HP 21HP 22HP 23HP 24HP 25HP 699709
    USD 30.00
    Carburetor For Briggs Stratton 698445 791888 793224 792358 794572 697141 697190
    USD 17.00
    Fuel Pump Fit For Caterpillar Backhoe Cat 414E 416D 416E 420D 252B 228-9129
    USD 26.97
    Carburetor Carb For Craftsman LT1000 LT2000 DLS3500 16HP 18HP 20HP Engine Parts
    USD 17.00
    3Inch Vise Milling Drilling Machine Clamp Vice For CNC Milling Precision Vise

    Description:

    Dimensions Jaw Width: 3"

    Jaw Opening: 2.95"

    Jaw Height: 1"

    Weight: 13 Lbs

    Accurate to 0.002” per 4” on squareness and 0.006” per 4” on parallelism without base

    Vise Key: 11.11mm table slot width, 12.00mm base width

     

    Product features

    Each pound of force in horizontal induces 1/2 lb of downward force, eliminating jaw tilt. This Vise is so designed that the horizontal force generated by tightening the handle pushes the semi-sphere within the movable jaw and thus thrusts the movable jaw downward. The workplace does not move up, even if it is held at the top of the jaw plates. 

    Highest clamping power. It's very accurate and durable

    Sliding surface of the vise bed is flame hardened and ground

    Vise bed is made from grey cast iron and the maximum tensile strength of the vise bed is 28,000 PSI

    With anti-jaw lifting mechanism. K type angle lock nut is made from the highest quality ductile Iron, firm and durable

    Acme screws and easy to read 0-360 deg scales

    Screws from the top through the jaw make the vise more stable and durable. Taiwan new type

    Four setting positions of the jaw plates are available, widening the jaw plates opening.

    PaymentReturnsDelivery detailsTerms of salesContact Us

    1.We currently only accept payment through PayPal.
    2.Payment must be made within a few days after the auction/bid ends, or eBay will open Unpaid Item case automatically .

    Make sure items fit your vehicle. For Part & Accessories items please verify the Part Number and Size carefully. And make sure the item will fit your vehicle.
    If you are not sure whether it will fit or not please contact us via eBay Message before buying.
    If you received an item which is NOT fit for your vehicle please contact us .

     

    Items will be shipped to your eBay address within one business day when we receive full payment.
    We ship to the worldwide with USPS or Fedex . Our warehouse is located in California .

    1. We leave Postive feedback to all our customers. If you satisfy with your item ,please leave us a postive feedback ,we are very appreciated .
     
    If for any reason you are not satisfied with the purchase, Please Do Not Leave Negative Feedback Before Contacting us .We will work hard to make it right and make you satisfied .


    2. Return

    If the item arrives to you in a non-working condition or "not as described",please contact us through ebay's "Contact Seller" message system .

     

    CONTACT US via eBay Messages.
    Any Question please contact us via eBay Messages.
    Customer service will respond to you within 24 hours.
    Thank you for your business!

    All rights reserved.

    • Condition: New
    • Brand: yibei-tech
    • MPN: YI74095
    • Jaw Width: 3 in
    • Jaw Opening Capacity: 2-63/64 in
    • Feature: ESCP
  • PicClick Insights - 3Inch Vise Milling Drilling Machine Clamp Vice For CNC Milling Precision Vise PicClick Exclusive

    •  Popularity - 0 watchers, 0.0 new watchers per day, 90 days for sale on eBay. 0 sold, 0 available.
    •  Best Price -
    •  Seller - 28,018+ items sold. 0.7% negative feedback. Great seller with very good positive feedback and over 50 ratings.

    People Also Loved PicClick Exclusive