Brand New
Hot Foil Stamping Machine Tipper For Credit Card
COME WITH 1 SILVER AND 1 GOLD ROLL
TWO FREE Foil Paper
stainless steel makes useful life longer
Top-quality can make useful lift twice longer than ordinary product
Feature:
A necessary equipment at the end of the process of producing hot foil items. This machine is major used for:
Printing or hot stamping your own design, logo, pattern or texts
on paper, leather, plastic, cloth, PVC cards, etc, with excellent hot foil stamping effect.
Specifications:
Power supply: 110V-240V / 50Hz - 60Hz
Power: 300W
Size: 26cm×16cm×34cm
Temperature control automatically:0-300?
Net weight: 7.5HG
Maximum stamping area: 60mm×90mm
Structure diagram of universal bronzing machine :
1. Height Adjustment knob 7. Rubber paper winding shaft
2. Paper drawing controller 8. Paper pressing shaft
3. Rubber shaft knob 9. Paper collecting shaft
4. Stamping paper holder 10. Heating/operation indicator light
5. Set screw 11. Power indicator light
6. Ink pad 12. Temperature adjustment knob
13. Height stop nut 19. Height locking screw
14. Front locating rod of stamping paper 20. Power switch
15. Set rule 21. Handle
16. Back locating rod of stamping paper
17. Heat transfer plate
18. Heating plate
Operational instructions:
Installation
1. Handle installation: Take out the handle from the accessories and insert it into the hole. Tighten the screws beside the handle to fasten the screws of the handle.
2. Height adjustment of main body: Loosen the height locking screw, adjust the height adjustment screw. It is more appropriate generally to adjust the screw to the position of about 30mm away from the character surface and stamping surface. Inspect whether the heat transfer plate is pressed closely to the heating plate, otherwise, it will affect the stamping effect.
Adjust stamping position
1. Pull out the ink pad, stick the alabaster paper larger than the external dimension of the electrotype on the stamping position of the ink pad with gummed paper and stamp with the center position of the heat transfer plate.
2. Switch on the power, the red power indicator light will be on. Turn the temperature adjustment knob to set the temperature to 100?The temperature control indicator light will be yellow and will change to green after more than 10 minutes, which represents the heat transfer plate has reached the needed temperature. (Due to the automatic constant temperature control, the signal light will change color frequently during the process of stamping operation, but it will not affect the stamping effect.)
Trial stamping
1. Must select the stamping paper with type suitable to the stamping piece.
2. Select the temperature. Select the needed temperature according to the different materials and stamping pieces. The following short list is only for reference.
|
Temperature
|
100?-150?
|
150?-180?
|
| Applicable stamping substances
|
PVC
Leather
Soft adhesive paper
Business card paper
|
Rubber
PVC card
Wooden products
|
3. Different temperatures will be required for different stamping paper. The coloring of the line edge will slop over to the blurring if the temperature is too high and the coloring will be non-uniform if the temperature is insufficient. Please make the adjustment according to the stamping effect.
4. Pressure and stamping time. Too deep stamped image represents the pressure is too large and too shallow and even imperfect image represents the pressure is too small. If the stamping time is too long, the stamping coloring will slop over to the blurring and if the stamping time is too short, the coloring will be non-uniform. Small pressure and short stamping time will be required for the stamping pieces with smooth surface. Large pressure and long stamping time will be required for the stamping pieces with coarse surface.
5. In case of any non-uniform coloring phenomenon for the trial stamping pieces, please refer to Fig.2 to make adjustment. Firstly loosen two fastening screws in the center and then adjust 4 balance screws. Adjust the balance screw directing to the part with shallow stamping image or without stamping in clockwise direction and adjust the balance crew directing to the part with deep stamping image or without coloring in counter-clockwise direction. It will reach the optimal effect through many adjustments. If there still tiny part without coloring on the large-area stamping surface after adjustment, please stick transparent gummed paper on the position without coloring. The purpose is to underlay this position to facilitate the coloring.
6. Adjust height stop nut. Avoid the mutual damage caused by the collision between the character surface and the heat transfer plate surface and the stamping surface when pulling the handle with too great force.
How to install stamping paper
1. Feed the stamping paper into the stamping paper holder: Take out the stamping paper holder, loosen the plastic round cover, put in the stamping paper roll, replace the plastic round cover and replace the stamping paper holder into the machine.
2. Pull the paper to the holder: Install the stamping paper according to the arrow-headed direction and pull it in clockwise direction. Firstly roll the external side of the back locating rod of the stamping, secondly stride over the external side of the front locating rod, then pass through the position between the rubber paper winding shaft and the paper pressing shaft in the clockwise direction, thirdly roll the stamping paper on the paper collecting shaft and fourthly lock with spring tab and turn the external knob of the rubber shaft to straighten up the stamping paper.
Notes: The colored surface of the stamping paper must be upward.
Applications
The product is widely used for: Printing or hot stamping your own design, logo, pattern or texts on paper, leather, plastic, cloth, PVC cards, etc, with excellent stamping pressure.
1, We accept PayPal only.
2, After you have won the auction, an email will be sent to your eBay registered email address.
3, If you are paying through Paypal using eCheck, note that your item can be shipped only after eCheck has cleared.
4, All payments are expected within 7 days after the last winning auction is closed. A non-payment dispute will be opened if full payment is not received.
5, We only ship the item to your Paypal address for fast and accurate shipment. If you want to change the address, please add a note when you make the payment.
1. Delivery and handling cost include packaging, labour and storage costs.
2. We only ship to the Lower 48 States. We also don't ship to FPO, APO or PO Boxes.
Notice:
We do not ship to these address : Puerto Rico, Hawaii, Alaska, Guam, the U.S. military address of the United States and The nonnative American address,
Please contact our customer service for the details ,thanks
3. All US lower 48 state orders will be carried by either UPS or FedEx or USPS to residential or commercial address only, NO PO. BOX. Delivery .
4. All US lower 48 state orders are generally shipped out with 1- 2 business day after your payment has been cleared (Sat. & Sun. & Public holiday excluded ).
5. Delivery time will take approximately 3 to 6 working days for major city metropolitan areas and 5 to 8 working days for more remote areas.
6. Please supply correct telephone number ( preferably mobile phone ) for courier to contact when delivering large item. It is very important to make sure someone is always available to sign for the item; otherwise there will be a delay for re-delivery after an unsuccessful delivery.
7. We do not have pick up service.
1. 12 months Manufacturer's Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty .
2. Defective items MUST BE reported and returned to us within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your eBay ID. WE DO NOT REPAIR OR REPLACE ITEMS WITH AN EXPIRED WARRANTY.
3. You have 30 days to contact us and 35 days to return it from the date it was received. If this item is in your possession more than 7days, it is considered used and WE WILL NOT ISSUE YOU A REFUND OR REPLACEMENT. There are NO EXCEPTIONS!
4. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your eBay ID.
5. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
6. Return shipping is to be paid by the Buyer.
Working Day: Monday to Saturday
Online Time: 9:00am to 18:00 pm
Please contact us with any comments, questions or suggestions that you may have,we will be happy to assist you.
You can contact us by leaving us an eBay message, or email us.
We Respond emails within 24 hours, Weekend within 36 hours.
Our office is closed on Sunday and Public holidays ,We apologize for the late reply during the holidays.
| 
2 watchers
Manual Hot Foil Stamping Machine Leather Gold Embossing Logo Press Embosser 300W
