EPEVER 20A MPPT Solar Charge Controller IP68 Solar Panel Regulator Tracer5210BP

EPEVER 20Amp MPPT Solar Charge Controller Waterproof ( Tracer5210BP+MT50+RS485) kit ,12V/24VDC auto work ,Max PV 100V , 260W/12V or 520W/12V ,Common negative grounding . Suitable for Lead-acid & Lithium batteries & User type

Technical Data:

• Model: Tracer5210BP + MT50 + RS485 Cable
• Rated charge and discharge current :20 Amp
• Nominal system voltage:12V/24V DC auto identify (Do not auto identify voltage of lithium battery system)
• Max. PV input power: 260W solar panels for 12V battery system or 520W solar panels for 24V battery system
• Max. PV open circuit voltage:100V(at minimum operating environment temperature) ;92V(at 25℃ environment temperature)
• Grounding : Common negative
• Battery type : Lead-acid battery :Sealed(Default) / Gel(AGM) / Flooded ; Lithium battery: LiFePO4 / Li-NiCoMn ; User .
• Battery input voltage range : 8.5～32V
• MPP voltage range:V(BAT+2V)～72V
• Tracking efficiency : ≥99% , Max. conversion efficiency :98%
• Temperature compensation coefficient: -3mV/℃/2V( Lithium battery don’t have temperature compensation coefficient)
• Working environment temperature : -40℃～+60℃
• Self-consumption: ≤13mA(12V);≤11.5mA(24V)
• Enclosure: IP68
• Recommend wire size: 12AWG(4mm2) ;
• Dimension: 153.3*105*52.1mm ; 
• Weight :1.20 KG

Package List:

• 1 X MPPT Solar Charge Controller 20A Tracer5210BP
• 1 X Remote Meter MT50 (with 2M cable)
• 1 X CC-RS485-RS485-150U-4LLT communication cable
• 2 X Manual (English)

EPEVER Tracer-BP series MPPT charge controller is Glue waterproof design , same functions as Tracer-AN series and added Features :

1. Tracer-AN could only support Load Working Mode : Manual mode ; Light ON/Off ; Light ON +Timer . Tracer-BP could also support Real-time Control mode .
2. IP68 waterproof degree.

Note :

Our local warehouse located in Chicago, Illinois, US. our professional engineer local team supply solar system solutions and services for you in time .

Product Features :

1. Adopt high quality components of ST,IR and Infneon, make sure product using lifespan
2. Wide working environment temperature
3. Apply to lead-acid battery and lithium battery, Lithium battery self-activating and low temperature protection function
4. Maximum conversion efciency of 98%, Advanced Maximum Power Point Tracking (MPPT) technology, with tracking efciency no less than 99%, Ultra-fast tracking speed and guaranteed tracking efciency ,Accurately recognizing and tracking of multiple power points
5. PV power limitation function
6. Monitoring and setting parameter via Mobile APP, PC Monitor setting software with RS485 communication interface
7. Use of standard Modbus communication protocol for RS485 bus connections, communication protocol compatibility much better , the RS485 connector can provide power supply
8. Aluminum housing for better cooling
9. Real-time energy statistics function
10. IP67 waterproof degree, Long lifespan design

Electronic protections

• PV Over Current ; PV Short Circuit ; PV Reverse Polarity
• Battery Reverse Polarity; Battery Over Voltage; Battery Over Discharge; Battery Overheating
• Lithium battery Low Temperature; Load Overload; Load Short Circuit
• Temperature sensor break down

 

 

 

Tracer7810BP +MT50+RS485

Step: Connect solar system in the order of 1.battery--> 2. load--> 3.PV array ; and disconnect solar system in the reverse order 3. 2. 1.

• Battery must be connected first ! Never connect soalr panel array to controller Without/Before connect battery.
• DO NOT connect any inverter/wind/Alternator or Charger into the charge controller directly ! You should connect with battery and add fuse .
• If there is a long distance between PV array and controller or between controller and battery, larger wires can be used to reduce voltage drop and improve performance. (Recommended wire size only for reference.)

How to monitor and program parameters for Battery？

1. Via Remote Meter MT50 (with CC-RS485-RS485-150U-4LLT communication cable )
2. Via phone APP(Android or IOS) , Accessories need：WiFi adapter(EPEVER-WiFi-2.4G-RJ45-D) or BLE adapter (EPEVER-BLE-RJ45-D).
3. Software download website: EPEVER official website or read in manual .

• Condition: New
• Current Output: 20A
• System Configuration: Off-Grid
• Power Source: Solar
• Inverter Technology: Battery-Based
• Color: Black
• Brand: Epever
• Current Type: DC
• Type: Charger/Inverter
• Voltage: 12V/24V/36V/48V
• Model: Tracer5210BP + MT50 + 4LLT
• Recommended Environment: Indoor/Outdoor
• Features: Automatic Voltage Detection, LCD Display, Temperature Control, Wi-Fi Port, IP68 Ingress protection
• Charging Mode: MPPT (Maximum Power Point Tracking)
• Application: Agriculture/Farming, Aquaculture, Back-up Power, Camping/Hiking, Commercial, Electronics, Home/Garden, Irrigation, Marine, Pool, Recreational Vehicle (RV)
• Protection Properties: Discharge Protection, Low Voltage Protection, Open Circuit Protection, Overcharge Protection, Overcurrent Protection, Overvoltage Protection, Reverse Current Protection, Reverse Polarity Protection, Safety Circuit Protection, Short Circuit Protection, Under Voltage Protection
• Power: 260W @12V battery or 520W @24V battery

See More