TECHTONGDA®
|
110V Semi Automatic
PCB Foot Cutting Machine Lead Wire Cutter with 8in Blade
|
|
The breadboard wipe cutting machine is mainly applied in
cutting the unwanted pin after the welding of parts of
apparatus and this machine is assembled by parts made
with exquisite craftwork. The key parts are dealt with
grinding , and the imported bearing assembled wipe
cutting machine grinding consistency is excellent, the
rotating speed of blade is fast and is very efficient
and convenient to operate with little noise. The
double lead rail is adjusted synchronously , the height
of wipe cutting is adjustable and the outlook is
attractive. "Continuous improvement, lasting and
efficient, clients first" is our quality tenet, it is
our honor to serve you.
|
Instruction of
adjusting
|
1.Open
the package and read the instruction carefully and check
the accessories (refer to term 7 in the instruction)
2.Check the body of machine for any abnormal phenomena,
if so , contact the local agent as soon as possible
3.After conforming the good connection of the case
earth, plug in.
4.First adjust the double lead rail travel route
biggest, unscrew the gland bush screw(gland bush screw
is right-handed screw )with 8# inner hexagonal wrench
counterclockwise,take out the blade gland bush and clean
up both sides of tool apron, blade, gland bush with
clean and soft cloth. Then place gently the blade on the
base(surface up). Next ,place the blade gland bush on
the blade, screw down the gland bush screw with 8# inner
hexagonal wrench clockwise. When unloading the blade,
use the enclosed dismantled stick to fix the tool apron.
5. Rotate the adjusting hand wheel, adjust the width
between the lead rails, and place one wanted placode of
wipe cutting machine on the entrance and exit port
respectively. Rotate the hand wheel until the placode at
both ports slide properly in the lead rail.
6.Four sets(three screws per set)assembling screws that
are equipped on top of lead rail bland bush are used to
adjust the thickness of placode. During the adjusting
first unscrew three perch screws among them and put
placode inside and then adjust two lower order screws
besides until they fit and screw down the middle screw.
Operation are the same for four sets and adjust placode
to slide properly inside the lead rail
7.Adjusting of height of wipe cutting machine : screw
down lead rail retaining screw and adjust the big screw
cap until the distance between blade and lead rail meets
the requirement then screw down lead rail retaining
screw. When adjusting lower avoid any friction between
lead rail and blade for fear of damage to blade.
8. The height of wipe cutting of wipe cutting machine
was adjusted as 1.5mm when it leaves factory and the
thickness of textile board was adjusted as 1.2mm. When
adjusting is necessary please adjust according to method
mentioned above.
|
Features
|
|
Specifiction
|
|
|
|
Notice: We send a
blade($350) as a gift.
|
Operations
|
1.
Place the welded breadboard on the adjusted wipe cutting machine and
insert the lead rail down the leading-in of lead rail.
2.Push dexter feed hand shank and push placode advance at constant
speed
3.Repeat step 1,2 and finish cutting the welded placode.
Notice: When the placode moves avoid moving too fast, and moving too
fast can directly shorten the use life of blade and even endanger
safety.
|
Maintenance
|
Wipe cutting machine
is the mechanic equipment of high accuracy and with high speed and
the constant maintenance prolongs its use life
1.The rotating part needs constant lubrication.
2.Clean up the cut pin
3.If the transmitting triangle strap is damaged, it needs immediate
replacement and the specification is (0-450)
4.The blade should not leave cutter head for too long, lubricate the
cutter head when necessary if it leaves for several days.
|
Notice
|
1.When the machine
is in operation avoid putting hands into the machine.
2. This machine must work in the state of good earth connection
3.Cut off the power when installing or dismantling blade or in case
of emergency
4.Cut off the power in sace of a blackout.
5.This machine should not be used in humid, flammable, corrosive,
dense bug dust-filled environment.
6. Non professional repairmen are not allowed to dismantle the cover
to repair it personally .
7.Do not open the cover when the machine rotates.
8.Operate the machine according to instruction strictly; otherwise
out factory takes no responsibility.
|
Item Include (151026)
|
1.A set of 110V
Semi automatic PCB foot cutting machine
2.A set of Blade
Shipping & Handling
Details
|
Default Shipping Cost or Free Shipping
Information:
▲ Default
shipping cost or free shipping service is only for the
customers from Canada or the lower 48 United States by
Canada Post, USPS or the UPS Ground. Customers from
other areas or needs other shipping ways, please
contact us.
▲ Buyers
from Guam, Puerto Rico, Virgin Islands, American Samoa,
Alaska, Hawaii, PO Boxes, APO/FPO addresses or other
countries/areas, there WILL be extra shipping costs,
please contact us for more detailed information.
▲ Please
make sure your address is valid for both UPS and USPS
services. Any costs incurred because of incorrect or
undeliverable address should be undertaken by buyer.
Handling
Time: Shipping
is usually made in 1-3 business days after payments
cleared. Orders are processed from Monday-Friday; Not
on the weekends & public holidays.
Sales tax /
Customs duties: Any
sales taxes or Customs duties are not included. If came
out, they must be undertaken by the buyer.
Damage In
Shipping: Email or call us First! We will
work with you to get the case resolved in the fastest
method.
|
Return / Refund
|
If you are not 100% happy with your
purchase, please contact Us. Please don't directly
opened a request or case without informing us, or
else, we will do some discounts on the warranty and
other sales-services later on. Hope for your
understanding.
Returns & Exchanges
▲ All
returns must be made within 14 days of delivery date.
Items must be in new, unused condition, with all
original materials included with the shipment. A
partial refund may be applied for opened or damaged
items, depending on the condition.
▲ Items
returned under the buyer’s remorse: The return shipping
fee must be covered by the buyer; The original
shipping cost will also be deducted from the refund.
15% restocking fee of the items purchase price will be
charged.
▲ Returns
that are the result of our seller's error: Buyer will
receive a full refund of the item as well as shipping
charges
▲ All
returns require a RA (Return Authorization) number
that will be given by our seller. Please contact with
us at first for more details.
Defective & Damaged Products
▲ If
product was received damaged or not as described, please
send us some pictures or videos, so we could well
understand your problem, then solve them for you ASAP.
Besides, it's much helpful for us to claim with UPS,
remind our related department to pay much more
attention to packaging later on. Hope for your
understanding.
▲ Replacement
or refund of defective or damaged products can only be
returned in exchange for the exact same product, or
else, the purchase price will be refunded back to your
original payment method.
▲ If
an item is received damaged, customer service must be
contacted within 7 days of receiving your item. All
returns require a RA (Return Authorization) number as
above.
|
Payment
|
eCheck Issues: Payments
via eCheck do not clear immediately. Usually you
will wait 5-7 days after checkout for it to clear.
Then we will arrange shipments for you.
|
Warranty & Feedback
|
▲ 6
months' warranty for the machines, not for the
consumables. We stand behind our products all the
item, so even if your warranty period has expired, you
can still seek for service or technical support from
us with low cost.
▲ Any
warranty shipping cost to us is responsible by buyer.
▲ Any
shipping cost to buyer is responsible by the seller.
▲ We
committee to the customer satisfaction and want to bring
you the best purchase experience. If there is any
problems, please contact us ASAP. If not, please leave
us a positive feedback as it's very important for us.
Thanks very much.
|
|