This product is not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176℉ (80℃), which is fully complied with national standard JB/T7352-2010. If energized continuously for more than 8 hours the coil may burn. It can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov .
SPECIFICATIONS
Brand | U.S. SOLID | |
Model | USS2-00006 | USS2-00302 |
PCS/CTN | 1 | 40 |
Thread Size | 3/8" | |
Thread Type | NPT | |
Valve Bore | 4mm | |
Body Material | Brass | |
Gasket / Diaphragm / Seal Material | VITON | |
Operation Type | Direct Lift Valve | |
Operation Mode | Normally Closed | |
Voltage | DC 12V ± 10% | |
Current | 1.667A ± 10% | |
Power rating | 20W ± 10% | |
Suitable Media | Air, Water, Oil, Diesel fuel, Kerosene etc. | |
Operational Pressure Range | Air/Water/Diesel fuel/Kerosene: 0 to 7bar (0 to 101psi); Oil: 0 to 5bar (0 to 72psi) | |
Flow Coefficient | 0.6Cv | |
Temperature | 14℉ to 248℉ (-10℃ to 120℃) | |
Certification | CE |
SHIPPING
RETURN POLICY