Tyco/Kilovac EV200AAANA 500+ Amps, 12-900 VDC SPST-NO Contactor/Relay
Comes with what you see in the pictures. If you don't see it, you probably wont get it.
Specifications are from Tyco/Kilovac and may vary slightly due to upgrades, options, or revisions this unit may or may not have.
These units are used, pulls.
The Unit's Information Reads:
Model Number: EV200AAANA
Coil Voltage: 12 - 24 VDC
Additional Information: ECONOMIZER ATTACHED
Link to the Datasheet: Tyco Kilovac EV200 Series Contactor Datasheet
Breakdown By Part Number:
Series: EV200 (500+ Amp, 12-900 VDC Contactor)
Contact Form: Normally Open
Coil Voltage: 9-36 VDC (1 = requires external coil economizer)
Coil Wire Length: 15.3" (390 mm) - Not sure if it has this full length anymore since removal
Coil Terminal Connector: None
Mounting & Power Terminals: Bottom Mount & Male 10mm x M8 Terminals
Key Features:
Designed to be the smallest, lightest weight, lowest cost sealed contractor in the industry with its current rating (500+ A carry, 2000 A interrupt at 320 VDC)
Built-in coil economizer - only 1.7 W hold power @ 12 VDC and it limits back EMF to 0 V.
Optional auxiliary contact for easy monitoring of power contact position.
Hermetically sealed - intrinsically safe, operates in explosive/harsh environments with no oxidation or contamination of coils or contacts, including long periods of operation.
Versatile coil/power connections.
CE marked for EC applications.
AiAG QS9000 designed, built and approved.
Typical Applications:
Battery Switching and Back-Up
DC Voltage Power Control
Circuit Protection and Safety
Specifications:
Contact Arrangement, Power Contacts: 1 Form X (SPST-NO-DM)
Rated Operating Voltage: 12 - 900 VDC
Continuous (Carry) Current, Typical: 500 @ 85°C, 400 mcm conductors
Make/Break Current at Various Voltages1/: See datasheet.
Break Current at 320 VDC1/: 2,000 A, 1 cycle3/
Contact Resistance, Typical (@ 200 A): 0.2 mohms
Load Life: See datasheet.
Mechanical Life: 1 Million cycles
Contact Arrangements, Auxiliary Contacts: 1 Form A (SPST-NO)
Aux. Contact Current, Max.: 2 A @ 30 VDC / 3 A @ 125 VAC
Aux. Contact Current, Min.: 100 mA @ 8 V
Aux. Contact Resistance, Max.: 0.417 ohms @ 30 VDC / .150 ohms @ 125 VAC
Operating Time @ 25°C:
Close (includes bounce), Typical: 15 ms
Bounce (after closing only), Max.: 7 ms
Release (including arcing), Max. @ 2000 A: 12 ms
Dielectric Withstanding Voltage: 2,200 Vrms @ sea level (leakage < 1 mA)
Insulation Resistance @ 500 VDC: 100 megohms2/
Shock, 11 ms 1/2 Sine, Peak, Operating: 20 G
Vibration, Sine, 80-2000 Hz, Peak: 20 G
Operating Ambient Temperature: -40°C to +85°C
Weight, Nominal: .95 lb (.43 kg)
Coil Operating Voltage (Valid Over Temperature Range):
Voltage (Will Operate): 9 - 36 VDC
Voltage, Max.: 36 VDC
Pickup (Close) Voltage, Max.: 9 VDC
Hold Voltage, Min.: 7.5 VDC
Dropout (Open) Voltage, Min.: 6 VDC
Inrush Current, Max.: 3.8 A
Holding Current, Avg.: 0.13 A @ 12 V, 0.07 @ 24 V
Inrush Time, Max.: 130 ms
Notes:
1/: Main power contacts
2/: 50 at end of life
3/: Does not meet dielectric & IR after test, 1700 amp for unit with Aux. Contacts
For More Pictures Please Click the Following:
Picture 2 - Side View #1
Picture 3 - Side View #2
Picture 4 - Top View
Picture 5 - Bottom View
For Domestic Customers: Packaging, handling, and order processing included in shipping in all domestic shipments as quoted by the shipping calculator. For International Customers there is a $0.00 minimum for packaging, handling, and order processing. International shipping to be determined by destination.
Prior to shipment I need to know the following information:
(1) Are you the end-user of this item?
(2) If you are not the ultimate end-user of the item, please state the ultimate end user's name.
(3) What is the ultimate country destination?
If you have any questions please call Michael at 1-866-MHZ-ELEC (1-866-649-3532) Toll Free.
Also, please click here to view or other auctions!
03/17/15
|