Seller:cables2kw5✉️(3,892)0%,
Location:Newington, Connecticut, US,
Ships to: US,
Item:232205433327Thermal Fuse / Cut-Off - 109 C, 228 F, 15A - NTE8108. Thermal fuse/cut-off by NTE. Miniature, NON−RESETTABLE temperature sensitive device designed to prevent appliances and electronic equipment from overheating. NTE thermal cutoffs are UL and CSA listed. The TCO (Thermal Cut Off) responds to temperature by interrupting an electrical circuit when the operating and/or environmental temperature exceeds the thermal rating of the device. This is accomplished when the internal organic pellet experiences a phase change, allowing the spring activated contacts to permanently open the circuit. SPECIFICATIONS:
Electrical Rating Volts: 120-277 VAC, Interrupting: 125VA Pilot Duty
Electrical Rating Volts: 180 VAC, Interrupting: 3A Motor Rating
FEATURES:
Maximum Current Rating: 15 Amps
Typical Opening Temperature
Tolerance: +0 C, −5 C
18 Gauge Solid Copper Wire
Full 1 1/3 ” leads to fit all replacement configurations
All types meet the requirements of Underwriters Laboratories Specifications, CSA, and VDE.
Each device comes packaged with 2 crimp splices for solderless connection.
UL File No. E49429
UL File No. E117626 (Guide # XCMQ2)
C−UL File No. E117626 (Guide # XCMQ8)
CSA File No. LR43279
VDE File No. 115369
Note 1: Temperature sensitive devices. Do not store above +48 C (+120 F).
Note 2: Color Band does not denote temperature group.
Note 3: The electrical resistance of the NTE series thermal cut−off is comparable to that found in an equal length of 18 gauge solid copper wire. With proper air flow, heat generation below 15 Amps is minimal, above 15Amps the upper limit on the currentcapacity will depend on the environment for each specific application.
Note 4: A general rule of thumb for continuous operating temperature for thermal cut−offs is 30 C less than the Maximum Opening Temperature.