3 Axis TB6560 CNC Stepper Motor Driver Board 1.5A-3A

$69.49 $62.54 Buy It Now, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: first-supply ✉️ (16,234) 100%, Location: HK, HK, Ships to: WORLDWIDE, Item: 266647416961 3 Axis TB6560 CNC Stepper Motor Driver Board 1.5A-3A. Frist-Supply World Shipping Money Back Guarantee 3 Axis TB6560 CNC Stepper Motor Driver Board 1.5A-3A /7

Descriptions

*NEW* 3 Axis TB6560AHQ Stepper Motor Driver Controller Descriptions

1-1/16 microstep setting-Higher accuracy and smoother operation than standard 1, 1/2 step

Adjustable 1.5A-3A drive current settings for each axis - 25%,50%,75%,100% of full current can be set for different stepper motors.
*Attention: This driver is 1.5A-3A version, which is specially designed for stepper motors with rated current from 1.5A to 3A. It's NOT compatible with stepper motors with rated current below 1.5A or above 3A.

Overload, over-current and over-temperature safety-Full protection for your computer and peripheral equipment.

On board current switching-Power output can be set according to specific user requirement.

Full closed-type optical isolation to protect the user's computer and equipment.

Relay spindle interface-Outputs Max. 36V 7.5A for spindle motors or coolant pump (only one device can be powered by this output!)

4 channel inputs interface-Can be used for XYZ limit and emergency stop.

Professional design-Two stage signal processing with super anti-jamming.

Bipolar constant current chopper drive with non-resonant region - Controls motors smoothly through range without creep effect.

Four-input Control; Allow setting the Limit, Emergence-Stop, Midpoint-Alignment, Cutter-Alignment.

Universal architecture-Supports most parallel software MACH3,KCAM4 etc.
*For compatibility with other softwares, please feel free to contact us.

Dip Switch Settings
Current Setting 1 2 Decay Mode Settings 3 4 MicroStep Settings 5 6
100% ON ON FAST ON ON 1 ON ON
75% ON OFF 25% ON OFF 1/2 ON OFF
50% OFF ON 50% OFF ON 1/8 OFF ON
25% OFF OFF SLOW OFF OFF 1/16 OFF OFF
Further Details Power supply DC 12-30V (not included, please feel free to contact us if you need !)
The stepper motor directly gets the power from the stepper driver, it doesn't require a separate power source. Voltage Selection

12-16V DC power supply for Nema 17 stepper motors

16-24V DC power supply for Nema 23 stepper motors

(High voltage will burn up the chips or stepper motors!!!))

Ampertage Selection:

Output current of the power supply can be calculated by the following expressions:

Output current = Rated current of your stepper motors * quantity + 2A

(For example, if you want to drive 3 * 3A Nema 23 stepper motors, theoretically 24V 11A DC power supply is recommended, but higher power such as 24V 15A also will be good. If you are not sure about the selection of power supply, please feel free to contact us for help).
Please SHUT DOWN the power before you plug or unplug the connectors to avoid burning up the board

The power output of 12V shall be applied to the radiator fan of 12V. Driver output compatible with 2 or 4 phase, 4,6 or 8 lead stepper motors, 3A max.
Suitable for unipolar or bipolar stepper motors. Voltage regulated spindle speed controlled by parallel interface as function of supply voltage. Connection Diagram For Reference

These external tools on the left and bottom of the following picture are only for exhibition. We don't have them for sale at the moment.

Specifications
Electrical properties (ambient temperature Tj = 25 °C pm):
Input Power 12-30V DC power supply
Stepper motor drive current 1.5A - 3A/phase
Drive type Double-pole constant flow PWM actuation output
Compatible Stepper motors 2 or 4 phase, 4,6 or 8 lead stepper motors, 3A max.
Dimensions 18 * 14 * 4 cm (L*W*H)

Content

1 x 3 Axis TB6560 Stepper Motor Driver 1.5A-3A

5 x Wire connectors

1 x White ribbon 5-pin limited cable

1 x DB25 parallel cable

1 x CD Driver

Services
Estimated Delivery Time
Country/Region Standard (Business Days) Express (Business Days)
UK, EU (27 Countries) 6 - 12 4 - 6
Other European Countries 6 - 15 4 - 7
USA, Canada, Mexico 5 - 10 3 - 5
Australia, New Zealand, South Asia, East Asia 7 - 12 3 - 5
South America, Other Countries/ Regions 15 - 25 varying
Remarks
  • • Usually, we dispatch your order within ONE to Three WORKING DAYs upon receipt of full payment when stock lasts.
  • • Above estimated delivery time is not guaranteed. However, 95%+ parcels are delivered within the reference time.
  • • For fixed-time delivery or any special needs , please do contact and confirm with us BEFORE placing order.
Duties-and-Taxes
  • • Under EU VAT rules, all goods sold to EU are subject to VAT at local rate.
  • • Starting 1 July 2021, eBay will collect VAT on certain orders delivered to EU addresses, on behalf of customers local tax authorities. When you see VAT is included/collected on invoice after cleared payment, you can just wait for the parcel to arrive at your door. Estimated delivery time is 4-12 business days, varies between destination countries and delivery services chosen.
  • • For orders above a certian value, eBay will not collect VAT at checkout, buyers are required to declare and pay tax at point of import.
  • To facilitate smooth customs clearance, we work with world's leading international couriers (i.e. FedEx, DHL) to ship your parcel via commercial grade express delivery service. The courier will properly handle customs duty and tax declaration when importing the parcel. You don't need to contact or visit customs/tax office in person. All you need to do is to pay your tax fees on delivery. Parcels will be delivered within 4-6 business days to most EU addresses under such arrangement.
Satisfaction Guaranteed 30 Days Money Back Guarantee
  • If you are not satisfied with the item purchased from us. Please contact us in writing (e.g. e-mail, eBay message) within 30 days of receipt of goods for return & refund guidance.
Free Replacement
  • If you receive a not-as-described (e.g. defective, incorrect, part missing) item, please contact us upon receipt of the item. We will arrange a replacement as soon as the case is confirmed.
12 Months Supplier Warranty
  • We provide ONE YEAR warranty on this product from date of purchase. If your item has any warranty issues, please contact us for a satisfying solution.
Requirements
  • • All qualified return/replacement must be guided by us. We may not accept your return without communication in advance.
  • • Any customs fee, handling charges, postage and insurance incurred in return/replacement are on customer's cost.
Agreement : By placing an order, you acknowledge that you have accepted the terms and conditions of sale. You are welcome to contact us with any questions. Image Gallery Descriptions Specifications What's In Terms & Condition
  • Condition: New
  • Brand: HY
  • MPN: 10014880117100600
  • Model: 3 Axis TB6560 Stepper Motor Driver
  • Application: For Nema16, 17, 23 Stepper Motors with 1.5-3A Current
  • Run Method: Support Software Mach3, Linuxcnc, KCam4, etc
  • Input Voltage: 12-30V DC
  • Number Of Axes: 3

PicClick Insights - 3 Axis TB6560 CNC Stepper Motor Driver Board 1.5A-3A PicClick Exclusive

  •  Popularity - 0 watchers, 0.0 new watchers per day, 57 days for sale on eBay. 1 sold, 5 available.
  •  Best Price -
  •  Seller - 16,234+ items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.

People Also Loved PicClick Exclusive