NEW Dell 1U Rack Sliding ReadyRail Ready Rail Kit P223J
Dell Rack Mounting Kits reduce the amount of time required to properly install Dell components into Dell rack cabinets.
This rail kit is compatible with, but not limited to, Dell PowerEdge R610 systems.
|P/N N915J:||1U Sliding ReadyRail, Right|
|P/N R137J:||1U Sliding ReadyRail, Left|
|P/N G378C:||Cable Straps|
|P/N J171K:||Rack Installation Instructions|
Installing Dell components into the Dell rack cabinets with ReadyRails sliding rails. (Video)
Dell Rack Mounting Rail Kits
|About DELL Rail Kits: |
DELL offers four choices for mounting rails. Dell rail kits will ONLY work with Dell servers.
|READY RAILS: |
Ready Rails are for use with Dell cabinet racks. They are designed to be compatible with square hole racks and unthreaded round hole racks. The rail attaches to the rack on the front mounting surface, instead of the rear and they require no tools for installation.
Rapid Rails are for use with DELL Cabinet racks. These are also referred to as "quick connect" rail kits. They employ square tab-style connectors to easily install in 24U and 42U Dell and many third party, square hole racks.
Versa Rails are for use with many Non-Dell 19" four post cabinet style racks. These rails can accomodate round or square holes and can be used with a DELL rack if the RAPID RAILS are not available, however they must be mounted using the screws through the square holes rather than snapping in.
|2-POST RAILS: |
2-Post Rail kits are used for standard 3" or 6" post mounted racks (telco type racks) and employ screws for mounting. These rack kits cannot be used on four post cabinet racks and cannot be modified to fit four post cabinet racks.
The 2-Post Rails kit is an unusual type of rail kit usable only by a few racks.