Front L & R Air Suspension Springs Fits Land Rover Range Rover Supercharged HSE

$198.99 $188.28 Buy It Now or Best Offer, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: topcn-autoparts ✉️ (180,752) 99.1%, Location: Ontario, California, US, Ships to: US & many other countries, Item: 264215977245 Front L & R Air Suspension Springs Fits Land Rover Range Rover Supercharged HSE.
  • *Compatibility Chart 1, You can distinguish specific model of an automobile by VIN(Vehicle Identification Number).
  • 2, VIN(Vehicle Identification Number) consists of total 17 English letters and arabic digits.
  • 3, VIN does not include the letters I (i), O (o), and Q (q) (to avoid confusion with numerals 1 and 0).
  •  
  • Land Rover Range Rover L322 Autobiography Sport Utility 4-Door 5.0L 2012 Base Sport Utility 4-Door 5.0L 2010-2012 Base Sport Utility 4-Door 4.4L 2003-2004 HSE Lux Sport Utility 4-Door 5.0L 2012 HSE Sport Utility 4-Door 5.0L 2010-2012 HSE Sport Utility 4-Door 4.4L 2003-2009 Supercharged Sport Utility 4-Door 5.0L 2010-2012 Supercharged Sport Utility 4-Door 4.2L 2006-2009

    Front L & R Air Suspension Springs Fits Land Rover Range Rover Supercharged HSE

    *Compatibility Chart
    1, You can distinguish specific model of an automobile by VIN(Vehicle Identification Number).

    2, VIN(Vehicle Identification Number) consists of total 17 English letters and arabic digits.

    3, VIN does not include the letters I (i), O (o), and Q (q) (to avoid confusion with numerals 1 and 0).

     

    Land Rover Range Rover L322
    Autobiography Sport Utility 4-Door 5.0L 2012
    Base Sport Utility 4-Door 5.0L 2010-2012
    Base Sport Utility 4-Door 4.4L 2003-2004
    HSE Lux Sport Utility 4-Door 5.0L 2012
    HSE Sport Utility 4-Door 5.0L 2010-2012
    HSE Sport Utility 4-Door 4.4L 2003-2009
    Supercharged Sport Utility 4-Door 5.0L 2010-2012
    Supercharged Sport Utility 4-Door 4.2L 2006-2009

     

    * Generation & Evolution:

    Range Rover
    Classic First generation (1970-1996)
    P38A Second generation (1994-2002)
    L322 Third generation (2002-2012)
    L405 Fourth generation (2012-present)

     

    Expanded Line
    Range Rover Sport
    L320 First generation (2005-2013)
    L494 Second generation (2013-present)
    SVR (2015 Pre-Facelift)
    SVR (2018 Facelift)

     

    Range Rover Evoque

    L538 First generation (2011-2018)
    L551 Second generation (2018-present)

     

    Range Rover Velar
    First generation (2017-present)

     

    *Platform Drive Layout :

    Front Engine-Four Wheel Drive Layout

     

    *L322 Air Suspension:

      The Third generation L322 has a monocoque (unibody) construction with four-wheel independent air suspension. Air suspension allowed variable ride height and achieved similar axle articulation to the previous live axle design. This retained off-road abilities while improving on-road performance. The new Range Rover's introduction in late 2002 as a 2003 model for the North American market resulted in the Range Rover and Ford Expedition (also new for 2003) being the only two SUVs in the full-size sport utility class with four-wheel independent suspension systems at that time.

     

    *Important Information:
    1.Install black washer with lip facing up. Then, install nut and tighten.
    2.Reinstall the lower cup and nut. Tighten the nut and re-install your existing top chuck.
    3.Re-use and install your existing silver washer and align the threaded holes with the lower fork of the shock.

     

    *Air Shock Strut Removal Guideline:
    1.Set steering to straight ahead.
    2.Raise vehicle.
    3.Remove front wheels.
    4.To release the air pressure from the front struts you will need to remove the right side front wheel well liner.(picture 1)


    5.With the wheel well liner removed you are able to access the front valve block located on the rear of the wheel well. Slowly release the air pressure from the front struts by loosening the yellow and black air hoses.(picture 2)


    6.Next, remove the brake hose and abs sensor wire from the retention bracket on the strut.(picture 3)


    7.Also remove the sensor wire from the front side of the strut held on with a small plastic clip.(picture 4)


    8.Disconnect the sway bar link by removing the nut holding the ball joint to the strut. You may need to hold the ball joint from spinning by placing a wrench on the two flats of the ball joint.(picture 5)


    9.Remove the two large bolts that hold the strut to the spindle assembly.(picture 6)


    10.With the nuts and bolts removed from the spindle assembly, pull the spindle outward while pushing the strut inward to disengage them.(picture 7)


    11.Under the hood are the upper retention fasteners, remove all three being careful not to drop the strut.(picture 8)


    12.With the strut removed you can now gain access to its hose connection, remove the fitting to free the assembly.(picture 9)


    13.Removal complete.(picture 10)

     

    *Air Spring Removal Guideline:
    1.Remove the shock retention nut from the top of the air strut assembly.(picture 11)


    2.Remove the nut and washer as illustrated.(picture 12)


    3.With the upper retention hardware removed, flip the strut over and locate the alignment pin on the bottom of the air spring assembly.(picture 13)


    4.With a slotted screwdriver or other adequate tool, remove the lock washer from the locating post.(picture 14)


    5.Remove the lock washer as illustrated.(picture 15)


    6.Tap the bottom of the air spring with a soft faced mallet to disengage the o-ring seals.(picture 16)


    7.Air spring as well as all o-rings and o-ring spacers are discarded. The only thing you will reuse is the shock itself. Disassembled view of shock.(picture 17)


    8.Clean the shock of any debris before beginning installation of the air spring.(picture 18)


    9.Removal complete.

     

    *Air Spring Installation Guideline:
    1.Install the new o-rings and o-ring spacers provided in 7 the kit in the same orientation as removed in step 7.
    2.Install the provided bumpstop over the strut shaft in the depicted orientation.
    3.Slide the gold washer over the threaded end of the shock.Ensure the perimeter “lip” Is facing downward away from the threads.
    4.Slide the new air spring assembly over the shock. Make sure to align the plastic alignment pin on the air spring through the hole in the shock’s piston seat. After you have pushed the lower piston’s alignment pin through the shock’s spring plate, slide the external locking clip over the plastic pin to secure the air spring to the shock.
    5.Push the upper black rubber mount over the shock’s shaft. Make sure to place the rubber seal in the correct orientation as depicted.
    6.Slide the black washer over the treaded end of the shock.ensure the perimeter “lip” is facing upward and towards the nut.
    7.Thread the m16nylon lock nut over the strut’s threaded shaft. You can tighten the nut using an impact wrench.
    8.Install completed strut back into the vehicle in the reverse order of removal.

    Depending on vehicle model, there are three possible build methods for your rebuilt arnott strut. Before proceeding with the build process,be sure to differentiate which air strut you are rebuilding and select the correct option.

     

    *Air Shock Strut Installation Guideline:

    Installation is in reverse order of removal.

     

    * Frequently Asked Questions :
    How to prevent the damage of air springs/How to extend the service life of air springs/struts etc.?
    An air strut with separable air springs
    If your vehicle offers a separable air suspension (Audi Allroad A6 C5, Mercedes-Benz W164, BMW X5, etc.), you should regularly (about once a week) lift the car to the maximum position, and remove dirt with a high-pressure cleaner (keep the cleaner at a distance to the air spring about 30 cm/12 inches, otherwise water pressure can damage the air spring). The highest position may vary depending on your model and regulation options. Therefore, please test this by trying the different modes available to you (Sport, comfort, dynamic, off-road) and choose the one that sets your vehicle to the highest position. The dirt will most likely be found under the fold of the pneumatic chambers. If you find a frozen layer of bitumen on the piston guide (the part of a strut on which the air spring is installed), it is recommended to clean it as well. Whenever possible, avoid riding on fresh asphalt, as fresh bitumen mixed with sand immediately results in a build-up of abrasives on the piston and in turn contributes to accelerated wear and tear of the air spring.
     

    A complete air suspension shock
    Many cars such as Mercedes W220 or W211 are set up with a complete air strut - shock absorber and air spring visually form a complete spare part. In many cases, you can easily recognize these by the metal cups with which the air spring is tightly mounted. To best avoid any damage, we highly recommend to regularly check the condition of the dust protection seals of the air strut.

     

    What is the difference between an air spring and an air strut?

    The air spring is a part of the air strut. Some vehicles (e.g. Mercedes ML) allow you to change the air spring separately. At our online shop you have the opportunity to buy either the whole air strut or only the air spring. For some type of vehicles it is not possible to change the air spring separately. In this case the whole air strut should be replaced.

     

    Which side of my car is the Right and Left?

    The right and left sides of an automobile are determined as if sitting in the car facing forward. Thus, the left side is on the left when sitting in the car facing forward, and the right side is on the right. For American cars, the driver’s side is on the left, and the passenger sits to the right of the driver. For cars in Japan, Britain, Ireland, the Bahamas and some other former British colonies -- where they drive on the left side of the road -- the passenger sits on the left side, and the driver (along with all the driving controls) is on the right.

     

    *OEM Part Number:

    RNB000070,RNB000750,RNB500550,
    RNB501350,RNB501410,RNB501530,

    LR032570, LR051702,

    RNB000060,RNB000740,RNB500540,
    RNB501340,RNB501400,RNB501520,

    LR032563,LR051700

     

    *Item Specifications:

    1. Key Words: Front Pair Air Suspension Spring Bags For L322 2002-2012 Land Rover Range Rover
    2. Package Includes: Pair for Front Left & Right  Air Suspension Spring Bags

    Notes : Please double confirm the compatibility as well as the OEM number before purchasing.
    Instruction is not included. Professional installation is recommended.

    Item Specifics
    Placement on Vehicle : Left
    Type : Air Suspension Spring
    Fitment Type : Direct Replacement
    Size : Single Dimension(CM) 46.00(Length)*21.00(Width)*20.00(Height)
    Single Weight(KG) : 5.580
    Upper Mounting Isolator Included : No Isolator Required
    Lower Mounting Isolator Included : No Isolator Required
    Upper Mount Type : Stud
    Lower Mount Type : Base Cup
    Included Hardware : Mounting Hardware
    Drive Layout : Front Engine 4WD
    Platform : L322
    Custom Bundle : Yes
    Material : Iron,Aluminium Alloy,Rubber
    Quantity : Pair
    Manufacturer Warranty : 1 Year
    OE Spec or Performance/Custom : OE Spec
    Adjustable : Yes
    Features : Sealed
    Brand : Topcn-Autoparts
    Manufacturer Part Number : TA80513701P
    Interchange Part Number : Air Suspension Spring Bags, Air Ride Spring Bags
    Other Part Number : LR032570, LR051702, LR032563, LR051700
    Superseded Part Number : RNB000070, RNB000750, RNB000060, RNB000740

    Shipping

    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

    1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
    2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-5 business days.
    3.Local pick up is not available.
    4.Orders to the rest of world may be shipped out from our warehouse in HongKong.
    5.International Buyers C Please Note:
    a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
    b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.  

    Payment

    We only accept payment through PayPal. You can open a Paypal account at www.paypal.com.

    Returns

    1.All of our brand new items come with a 60-Days money-back guarantee.
    2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.
    3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
    4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost. 
    5.Shipping& handling cost are not refundable. 
    6.Man-made damage by abuse or wrong operation is not covered by this warranty.
    7.No product liability insurance is assumed.
    8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax.  

    Customer Services

      Q: How do I pay for my purchase?
    A: MY store accepts PayPal. 
    Q: When will the item be shipped out?
    A: This item will be shipped with 2 business day once payment completed.
    Q: Where is my tracking number?
    A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
    Q: How do I return an item?
    A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item.  

    Feedback

    1. We will leave positive feedback once we get your payment. 
    2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
    3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR.

    DESCRIPTION PAYMENT SHIPPING RETURN POLICY CONTACT US
    Shop Category  Store Home  Ignition Coils  complete struts  Radiator Support  Wheel Hub Bearing  Wheel Adaptor  Oxygen Sensor  Towing mirrors  Fuel pump assembly  Lift supports  Starter  Key or key case  struts  floor mats  wheel lug nuts  Cylinder Piston Gasket Kit  Cylinder Head Gasket Sets  CV Axle  Door handle  Radiator  fastener  UTV & ATV Brake System Parts  ▷  Brake Pads   ♢  Sintered Brake Pads   ♢  Kevlar Carbon Brake Pads  ◈  Brake Shoes  Regulator Rectifier  blower motor fan  blower motor resistor  suspension kit  ◈  suspension kits  ◈  suspension cj  ◈  suspension gxy  ◈  suspension fu  AC Compressor  Brake system  ◈  Brake Rotors  ◈  Brake Pads  ◈  Brake Rotors and Pads  ◈  Brake Pad Sensor  ◈  Brake Drum  ◈  Brake Shoes  ◈  Brake Calipers  ◈  Brake Calipers & pads  ◈  Brake Calipers & Rotors & pads  Car Seat Cover  Air Suspensions  Nerf Bars & Running Boards  Window Switch  Mass Air Flow Sensor-MAF  Window Regulator  Side Fender marker  Alternator  Leveling Lift Kit  Car Cover  Fuel Injector  Coilover  Car Tools  License Plate Frame  Windshield Wiper Motor  Thermostat Housing  Radiator Coolant Tank  Fuel Tank Pipe  Valve Cover  Door Lock Actuator  Power Steering Pump  Variable Timing Solenoid (VVT)  Electric Water Pump  Timing Chain Kits  Timing Belt Kits  Water Pumps  Oil Pump  Strut Tie Bar  Tire Pressure Sensor  Throttle Body  Harmonic Balancer  Oil Pan  Motorcycle Carburetor & Parts  Urea Pump  Cooling Fan  Cooling Fan Clutch  Oil Cooler  Hydraulic Lifter&Roller Lifter  Suspension+Strut+Bearing  HVAC  ATV Rear Wheel Axle  Parking sensor  Car Antenna  ABS Wheel Speed Sensor  PTO Clutch  Spoilers & Wings  Tensioners  Purge Valve  Knock Sensor  Turbocharger  Crankshaft Position Sensor  Camshaft Position Sensor  MAP Sensor  Oil Pressure Sensor  Throttle Position Sensor  Stator  idle air control valve  Transfer Case Shift Motor  Secondary Air Injection Pump  Running Board Motor  Consoles & Parts  Roof rack  Bumper  Tire Pressure Gauge  Steering Rack  Air Diesel Heater  Engine Mount  Glow Plug  Air Cleaner Filter Box  Cylinder Piston Kit  Pressure Tester Gauge  Jack Stands  Wheel Lug  Sun Visor  Window Visor  trim tilt motor  ATV Brake Caliper  Oil Catch Can Tank  Crankcase Vent Valve  Horns  Steering U-Joint  Fuel Cell Tank  Height Level Sensor  Temperature Sensor  Driveshaft  Air Ride Suspension Valves  Calipers & Rotors  ◈  Calipers & Rotors Pads  Radiator Hose  Ballast module  Rubber Seal Strip  Dipstick  Removal Open Tools  Camshaft & Crankshaft  ATV Brake Master Cylinder  Rocker Arm  Battery Switch  Oil Fuel Hose Line  brake Hose Line  LED headlight Assembly  Wheel Hub Bearing Knuckle  headlight motorcycle  Foot Rest Pedal  O Ring  water Pump Impeller  Strut Mount  Splash Guards & Mud Flaps  Heater Cores  Evaporators  vehicle speed sensor  RV Water Pump  Fuel Pressure Regulator  Light Bar Mount Bracket  Sensor-8  CV axle+Brake Pads/Rotors  universal spacer  Steering Shaft  transmission filter  Steering Wheel  Steering Wheel Hub  Steering Gear Box  snorkel air intake  CDI BOX  Proportioning Valve  Spindle  Window Glass Hinge  Other Golf Cart Parts  Intercoolers  Crankshaft Pulley  Steering Knuckle  4 pcs wheel hub bearing  Fender Flares  jumper cable  Tonneau Cover  Bug Shield  Front Bumper Lip  dash cover  primary drive clutch  golf  car seat crevice box  AC Compressor Control Valve+A  carburetor intake mainfold  Fuel Valve& Petcocks  Garden Water Pump  air vent  Ignition Wires  Lower Kits & Parts  Cargo Cover  Leaf Springs  Shift Knobs & Boots  Hub Caps  ATV Ignition Switch  fog lights  winch  Jeep Wrangler Headlights  Pivot Brake Clutch Lever  Power Brake Booster  leveling kit + struts shocks  Wheel Rim  Lights  ◈  Side/Cab Marker Lights  ◈  Instrument Panel Lights  ◈  Third Brake Lights  ◈  Interior Lights  ◈  Exterior Lights  ◈  Led Headlights  ◈  Special Model Lights  Handlebar Riser  flywheel  Air Dryer  steering knuckle-7  Bed Step  Other Hot Item
    2x Front Hood Lift Supports Shocks Struts For Dodge Ram 1500 2500 3500 4500 5500
    USD 17.74
    2 For Dodge Challenger 2008-2014 Keyless Entry Remote Control Car Key Fob
    USD 18.35
    2x Front Hood Gas Lift Supports Struts Shocks Springs For Dodge Ram 02-10 4364
    USD 17.69
    Upstream & Downstream Oxygen O2 02 Sensor For 2001-2005 Honda Civic 1.7L D17A7
    USD 23.81
    Throttle Body for Dodge Avenger Journey Caliber Jeep Patriot Compass 2.4L 2.0L
    USD 46.99
    New List Item
    Black Roof Rack For Toyota RAV4 XA30 2006- 2012 Cover Rail End Shell Replacement
    USD 18.09
    Roof Top Rack For KIA Telluride 2019 2020 Blk CrossBar Carrier luggage Aluminum
    USD 77.86
    For Honda Pilot 2003-2008 Aluminum Luggage Carrier Top Roof Rack Cross Bars
    USD 70.40
    2pcs for 1996-2000 Toyota 4Runner 2.7L Upstream Downstream Oxygen Sensor O2 02
    USD 25.99
    Brand New for 2002-2004 Volkswagen Passat 4.0L W8 02 O2 Oxygen Sensor Upstream
    USD 34.99
    Front L & R Air Suspension Springs Fits Land Rover Range Rover Supercharged HSE

    *Compatibility Chart
    1, You can distinguish specific model of an automobile by VIN(Vehicle Identification Number).

    2, VIN(Vehicle Identification Number) consists of total 17 English letters and arabic digits.

    3, VIN does not include the letters I (i), O (o), and Q (q) (to avoid confusion with numerals 1 and 0).

     

    Land Rover Range Rover L322
    Autobiography Sport Utility 4-Door 5.0L 2012
    Base Sport Utility 4-Door 5.0L 2010-2012
    Base Sport Utility 4-Door 4.4L 2003-2004
    HSE Lux Sport Utility 4-Door 5.0L 2012
    HSE Sport Utility 4-Door 5.0L 2010-2012
    HSE Sport Utility 4-Door 4.4L 2003-2009
    Supercharged Sport Utility 4-Door 5.0L 2010-2012
    Supercharged Sport Utility 4-Door 4.2L 2006-2009

     

    * Generation & Evolution:

    Range Rover
    Classic First generation (1970-1996)
    P38A Second generation (1994-2002)
    L322 Third generation (2002-2012)
    L405 Fourth generation (2012-present)

     

    Expanded Line
    Range Rover Sport
    L320 First generation (2005-2013)
    L494 Second generation (2013-present)
    SVR (2015 Pre-Facelift)
    SVR (2018 Facelift)

     

    Range Rover Evoque

    L538 First generation (2011-2018)
    L551 Second generation (2018-present)

     

    Range Rover Velar
    First generation (2017-present)

     

    *Platform Drive Layout :

    Front Engine-Four Wheel Drive Layout

     

    *L322 Air Suspension:

      The Third generation L322 has a monocoque (unibody) construction with four-wheel independent air suspension. Air suspension allowed variable ride height and achieved similar axle articulation to the previous live axle design. This retained off-road abilities while improving on-road performance. The new Range Rover's introduction in late 2002 as a 2003 model for the North American market resulted in the Range Rover and Ford Expedition (also new for 2003) being the only two SUVs in the full-size sport utility class with four-wheel independent suspension systems at that time.

     

    *Important Information:
    1.Install black washer with lip facing up. Then, install nut and tighten.
    2.Reinstall the lower cup and nut. Tighten the nut and re-install your existing top chuck.
    3.Re-use and install your existing silver washer and align the threaded holes with the lower fork of the shock.

     

    *Air Shock Strut Removal Guideline:
    1.Set steering to straight ahead.
    2.Raise vehicle.
    3.Remove front wheels.
    4.To release the air pressure from the front struts you will need to remove the right side front wheel well liner.(picture 1)


    5.With the wheel well liner removed you are able to access the front valve block located on the rear of the wheel well. Slowly release the air pressure from the front struts by loosening the yellow and black air hoses.(picture 2)


    6.Next, remove the brake hose and abs sensor wire from the retention bracket on the strut.(picture 3)


    7.Also remove the sensor wire from the front side of the strut held on with a small plastic clip.(picture 4)


    8.Disconnect the sway bar link by removing the nut holding the ball joint to the strut. You may need to hold the ball joint from spinning by placing a wrench on the two flats of the ball joint.(picture 5)


    9.Remove the two large bolts that hold the strut to the spindle assembly.(picture 6)


    10.With the nuts and bolts removed from the spindle assembly, pull the spindle outward while pushing the strut inward to disengage them.(picture 7)


    11.Under the hood are the upper retention fasteners, remove all three being careful not to drop the strut.(picture 8)


    12.With the strut removed you can now gain access to its hose connection, remove the fitting to free the assembly.(picture 9)


    13.Removal complete.(picture 10)

     

    *Air Spring Removal Guideline:
    1.Remove the shock retention nut from the top of the air strut assembly.(picture 11)


    2.Remove the nut and washer as illustrated.(picture 12)


    3.With the upper retention hardware removed, flip the strut over and locate the alignment pin on the bottom of the air spring assembly.(picture 13)


    4.With a slotted screwdriver or other adequate tool, remove the lock washer from the locating post.(picture 14)


    5.Remove the lock washer as illustrated.(picture 15)


    6.Tap the bottom of the air spring with a soft faced mallet to disengage the o-ring seals.(picture 16)


    7.Air spring as well as all o-rings and o-ring spacers are discarded. The only thing you will reuse is the shock itself. Disassembled view of shock.(picture 17)


    8.Clean the shock of any debris before beginning installation of the air spring.(picture 18)


    9.Removal complete.

     

    *Air Spring Installation Guideline:
    1.Install the new o-rings and o-ring spacers provided in 7 the kit in the same orientation as removed in step 7.
    2.Install the provided bumpstop over the strut shaft in the depicted orientation.
    3.Slide the gold washer over the threaded end of the shock.Ensure the perimeter “lip” Is facing downward away from the threads.
    4.Slide the new air spring assembly over the shock. Make sure to align the plastic alignment pin on the air spring through the hole in the shock’s piston seat. After you have pushed the lower piston’s alignment pin through the shock’s spring plate, slide the external locking clip over the plastic pin to secure the air spring to the shock.
    5.Push the upper black rubber mount over the shock’s shaft. Make sure to place the rubber seal in the correct orientation as depicted.
    6.Slide the black washer over the treaded end of the shock.ensure the perimeter “lip” is facing upward and towards the nut.
    7.Thread the m16nylon lock nut over the strut’s threaded shaft. You can tighten the nut using an impact wrench.
    8.Install completed strut back into the vehicle in the reverse order of removal.

    Depending on vehicle model, there are three possible build methods for your rebuilt arnott strut. Before proceeding with the build process,be sure to differentiate which air strut you are rebuilding and select the correct option.

     

    *Air Shock Strut Installation Guideline:

    Installation is in reverse order of removal.

     

    * Frequently Asked Questions :
    How to prevent the damage of air springs/How to extend the service life of air springs/struts etc.?
    An air strut with separable air springs
    If your vehicle offers a separable air suspension (Audi Allroad A6 C5, Mercedes-Benz W164, BMW X5, etc.), you should regularly (about once a week) lift the car to the maximum position, and remove dirt with a high-pressure cleaner (keep the cleaner at a distance to the air spring about 30 cm/12 inches, otherwise water pressure can damage the air spring). The highest position may vary depending on your model and regulation options. Therefore, please test this by trying the different modes available to you (Sport, comfort, dynamic, off-road) and choose the one that sets your vehicle to the highest position. The dirt will most likely be found under the fold of the pneumatic chambers. If you find a frozen layer of bitumen on the piston guide (the part of a strut on which the air spring is installed), it is recommended to clean it as well. Whenever possible, avoid riding on fresh asphalt, as fresh bitumen mixed with sand immediately results in a build-up of abrasives on the piston and in turn contributes to accelerated wear and tear of the air spring.
     

    A complete air suspension shock
    Many cars such as Mercedes W220 or W211 are set up with a complete air strut - shock absorber and air spring visually form a complete spare part. In many cases, you can easily recognize these by the metal cups with which the air spring is tightly mounted. To best avoid any damage, we highly recommend to regularly check the condition of the dust protection seals of the air strut.

     

    What is the difference between an air spring and an air strut?

    The air spring is a part of the air strut. Some vehicles (e.g. Mercedes ML) allow you to change the air spring separately. At our online shop you have the opportunity to buy either the whole air strut or only the air spring. For some type of vehicles it is not possible to change the air spring separately. In this case the whole air strut should be replaced.

     

    Which side of my car is the Right and Left?

    The right and left sides of an automobile are determined as if sitting in the car facing forward. Thus, the left side is on the left when sitting in the car facing forward, and the right side is on the right. For American cars, the driver’s side is on the left, and the passenger sits to the right of the driver. For cars in Japan, Britain, Ireland, the Bahamas and some other former British colonies -- where they drive on the left side of the road -- the passenger sits on the left side, and the driver (along with all the driving controls) is on the right.

     

    *OEM Part Number:

    RNB000070,RNB000750,RNB500550,
    RNB501350,RNB501410,RNB501530,

    LR032570, LR051702,

    RNB000060,RNB000740,RNB500540,
    RNB501340,RNB501400,RNB501520,

    LR032563,LR051700

     

    *Item Specifications:

    1. Key Words: Front Pair Air Suspension Spring Bags For L322 2002-2012 Land Rover Range Rover
    2. Package Includes: Pair for Front Left & Right  Air Suspension Spring Bags

    Notes : Please double confirm the compatibility as well as the OEM number before purchasing.
    Instruction is not included. Professional installation is recommended.

    ShippingPaymentReturnsCustomer ServicesFeedback

    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

    1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
    2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-5 business days.
    3.Local pick up is not available.
    4.Orders to the rest of world may be shipped out from our warehouse in HongKong.
    5.International Buyers C Please Note:
    a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
    b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.  

    We only accept payment through PayPal. You can open a Paypal account at www.paypal.com.

    1.All of our brand new items come with a 60-Days money-back guarantee.
    2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.
    3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
    4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost. 
    5.Shipping& handling cost are not refundable. 
    6.Man-made damage by abuse or wrong operation is not covered by this warranty.
    7.No product liability insurance is assumed.
    8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax.  

      Q: How do I pay for my purchase?
    A: MY store accepts PayPal. 
    Q: When will the item be shipped out?
    A: This item will be shipped with 2 business day once payment completed.
    Q: Where is my tracking number?
    A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
    Q: How do I return an item?
    A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item.  

    1. We will leave positive feedback once we get your payment. 
    2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
    3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR.

    Copyright of Topcn-autoparts. All rights reserved.

    • Condition: New
    • Placement on Vehicle: Left, Right, Front
    • Type: Air Suspension Spring
    • Fitment Type: Direct Replacement
    • Size: Single Dimension(CM) 46.00(Length)*21.00(Width)*20.00(Height)
    • Single Weight(KG): 5.580
    • Upper Mounting Isolator Included: No Isolator Required
    • Lower Mounting Isolator Included: No Isolator Required
    • Upper Mount Type: Stud
    • Lower Mount Type: Base Cup
    • Included Hardware: Mounting Hardware
    • Drive Layout: Front Engine 4WD
    • Platform: L322
    • Custom Bundle: Yes
    • Material: Iron,Aluminium Alloy,Rubber
    • Quantity: Pair
    • Manufacturer Warranty: 1 Year
    • OE Spec or Performance/Custom: OE Spec
    • Adjustable: Yes
    • Features: Sealed
    • Brand: Topcn-Autoparts
    • Manufacturer Part Number: TA80513701P
    • Interchange Part Number: Air Suspension Spring Bags, Air Ride Spring Bags
    • Other Part Number: LR032570, LR051702, LR032563, LR051700
    • Superseded Part Number: RNB000070, RNB000750, RNB000060, RNB000740
  • PicClick Insights - Front L & R Air Suspension Springs Fits Land Rover Range Rover Supercharged HSE PicClick Exclusive

    •  Popularity - 9 watchers, 0.0 new watchers per day, 1,858 days for sale on eBay. Super high amount watching. 11 sold, 4 available.
    •  Best Price -
    •  Seller - 180,752+ items sold. 0.9% negative feedback. Great seller with very good positive feedback and over 50 ratings.

    People Also Loved PicClick Exclusive