Up for auction is a Kelly Works True Temper Flint Edge Double Bit restored axe.
The head is 9 1/2 inches long, with a cutting faces 4 1/2 inches wide.
Head weighs 3.2 lbs , marked.
Total length is 34 3/4 inches.
The Axe you see pictured is the one you will receive
You are bidding on a one of a kind tool.
These exes are of my own craftsmanship.
I personally take a vintage axehead and bring it back to life.
I remove any mushrooming and abuse to the cutting face
Heads are than stripped to bare metal and primed with three coats of red oxide primer.
Primer is cured over time.
A new Hickory handle is selected and installed custom to each axe head.
Handles are then shaped and sanded smooth.
Heads then received three topcoats of quality enamel.
Heads are them sharpened to a point that will cut, they can be made razor-sharp.
Handles then receive multiple coats of boiled linseed oil.
I saturate the handle until or receives no more.
I hope that you will enjoy your new axe either as a working tool a decoration for your wall or an addition to your vintage Jeep.
Sincerely , Scott Schiller