EPIC® Seal Ceramic to metal braze Gas filled hermetic chamber protects key components Exceeds IP69K standard Temperature - Tested to temperatures up to 200°C Contacts/Form - Silver / SPST / NO Coil- Efficient two coil design with no PWM or EMI emissions, coil suppression built in, wire leads 38cm/15in High Shock and Vibration - For rugged environments, off-road and tracked vehicles Installation - Not direction sensitive, bottom mounting Made in USA - Designed and manufactured in the USA Reference MIL-R-6106, RoHS Continuous Current 400A w/ 300MCM Max Current—1 sec 3000A Max Current—10 sec 2000A Max Current—90 sec 1000A Contact Voltage Drop (max) 150mV at 400A Insulation Resistance (min) 100MΩ (50MΩ after life) Dielectric Withstanding 1500VRMS (1050 VRMS after life) Operate Time (max) 20 msec (include bounce) Release Time (max) 12 msec Weight 1.1 lb with hardware (500 grams)
400A at 24 VDC 100,000 cycles Mechanical Life 300,000 cycles Fault Interrupt @ 28VDC 3000A
Chassis level UL508 sized power terminals – No need for specially routed power cables, special bus bars, or special lugs.
Rugged EPIC Seal rated to 175°C – Reduced risk of fire or meltdown in over current conditions. The same technology used for advanced aerospace programs.
Hermetically Sealed – Designed to meet: UL1604 for Class I & II, Div 2 and Class III for use in hazardous locations, IP67 for temporary water immersion for 30 min, SAE J1171 - external ignition protection, and ISO8846 for protection against ignition around flammable gasses.
High Efficiency Dual DC Coils – Very low 12 or 24 VDC continuous coil power with no EMI emissions or cross-talk on your system control power. Ideal for battery powered systems or where low power is needed.
Built-in coil suppression for all DC coils – Saves you engineering time and parts cost to add external coil suppression.
Stainless steel hardware and mounting inserts, for years of corrosion free service.
UL508 ambient compliant to 75°C but can operate continuously at 85°C with a higher terminal temperature rise of 60°C. Can also operate up to 125°C in special cases - contact GIGAVAC for details.
Not position sensitive – can be mounted in any position for ease of installation.