Gecko G540 Rev8, & 4 Nema 23 600oz 8mm Dual Shaft & 48v 12.5a Power Supply

$700.00 Buy It Now, FREE Shipping, eBay Money Back Guarantee
Seller: len1007 ✉️ (2,771) 100%, Location: Spring Hill, Florida, US, Ships to: AMERICAS & many other countries, Item: 131507008147 Gecko G540 Rev8, & 4 Nema 23 600oz 8mm Dual Shaft & 48v 12.5a Power Supply.

Please review the entire listing and all videos to understand the component package your purchasing.

This listing includes a Gecko Drive G540 Integrated Digital  4 Axis Micro  Stepping Driver System (REV8 2021 Edition ), 48v 12.5a (600w) power supply supporting 110v, and 220v input, four Nema 23 3.5a 600oz motors, E-stop Switch, and four snap home/limit switches . 

This drive features the longest warranty on any CNC driver in the industry at 3 years with full US support. 

Here's an overview on the drive covered from Marcus application engineer at Gecko Drive.

GeckoDrive G540 4-Axis Stepper Controller Product Highlights

Video will open in a new window Using the eBay App? Paste link into a browser window:

[isdntekvideo]

The drives specs are below.

 If you need to zoom in on them hit CTRL on your keyboard, while scolling with your mouse's center button to zoom in, and out.

The power supply you select for the G540 is critical as it will provide the system's speed, and required amps to support all four of the G540's axis. My unit is designed in house to provide all the volts the drives require with a surplus of amps to assure your system's supported even if you decide to expand your system to five, or six axis with an ESS system here.  https://www.ebay.com/itm/133064380079

This kit uses my 48v 12.5a (600w ) TRUE CNC power supplies.  These units are all calibrated in house prior to shipping to you with a FLUKE 179 TRUE RMS multimeter.

 The unit supports both 110v, and 220v power inputs for all the worlds power outputs via a selector switch. 

These units were custom designed, and supports a single 48v power output rail with  10 negative, and  10  positive terminals for power output as the pictures reflect. 

This allows for much less labor, and monetary investment required for CNC robotic system configurations using multiple accessory hookups as typical power supplies only have 3 terminals available on the V-, and V+ terminals requiring additional spending with terminal splitters to eliminate  "Daisy Chaining"  which is best practice when assembling your controller.

This power supply was designed exclusively for robotics use. That being said most switching power supplies simply feature a toroid passive noise filter which doesn't provide as efficient EMI mitigation as an actual EMI noise filter. 

This unit is the only one that  features  an actual  built in EMI filter  covered in the video below for the cleanest possible power output to provide your CNC robot with.

The system also has an integrated brushless fan  that's controlled thermostatically based on the ambient internal temperature which is a critical feature for any unit being installed in a CNC electronics enclosure.

The unit also features built in overload protection, and automatic shutdown with reset, and recovery

The complete specs are below.

This kit also includes four of my Nema 23 600oz/in (37.5in/lbs ) 3.5a stepper motors with dual 8mm shafts for maximum durability, and compatibility for your retrofit. Resistors for these motors are also included for the G540 

These are the largest torque Nema 23 motors available I designed specifically for the G540 to allow easy machining of aluminum, steel, and all softer substrates in between without having my clients have to spend more investing in Nema 34 motors. 

The complete specs of these motors are below. 

This drive can achieve less than .001in accuracy with this component package, and features the repeatability to take your business to the next level. 

Please review the videos below of the drive in action.

MythBusted  Stepper Motor Accuracy Less Than .001in! Gecko G540 - YouTube

Video will open in a new window Using the eBay App? Paste link into a browser window:

[isdntekvideo]

 I made a video series on the breakdown of the users manual as well as an overview of the drive itself explaining tips when assembling your controller. You're spending the money, and I'm providing you my years of engineering knowledge to assist you in making your controller assembly a painless process. 

Other videos on my YouTube channel discuss complete CNC electronics overviews. I encourage you to educate yourself with the facts on what your getting into with micro manufacturing. 

Please set time aside to watch these as they aren't short because I wanted to cover the drive completely.

Gecko G540 Overview Part 1 Users Manual Breakdown 

Gecko G540 Overview Part 1 Users Manual Breakdown - YouTube

Video will open in a new window Using the eBay App? Paste link into a browser window:

[isdntekvideo]

Gecko G540 Overview Part 2 The Drive, And Tips When Building Your Controller  

Gecko G540 Overview Part 2 The Drive, And Tips When Building Your Controller. - YouTube

Video will open in a new window Using the eBay App? Paste link into a browser window:

[isdntekvideo]

This kits components includes the following.

1 Gecko Drive G540 Integrated Digital  4 Axis Micro  Stepping Driver System (REV8 2020 Edition ) with 4 DB9 male solder type motor connectors with matching hoods, and hardware (3 year US warranty)

4 Nema 23 600oz/in (37.5in/lbs) motors with 6.4 inductance, featuring 8mm dual shafts. Please review the specs above on these monsters. These are engineered in house for the best performance when combined with the G540. These motors also include the wiring diagram on them for simple hookup, and go operation. They feature a super low inductance rating of 6.4mh which provides less torque bleed off at higher speeds.

1 48v 12.5A (600w) power supply with 120/220v selectable power input to support the worlds power outputs. I test, and calibrate each unit with a FLUKE 179 TRUE RMS multimeter prior to shipping to assure you the most accurate power output.   This power supply offers the required power to support all four axis, and offer expansion capability should you want to upgrade your system with  my ESS turnkey controller package allowing your system to be converted up to the 6 axis Mach3 supports. Here's a link to understand the process of the conversion  https://www.ebay.com/itm/133115955460

 4 Omron V-156-1C25 Limit Switches with hinged roller trigger

Voltage & Load Rating: 15A 125/250VAC, 0.6A 125VDC, 0.3A 250VDC

 1 E-stop Switch twist to release Switch Most importantly all required wiring diagrams are emailed to you once I receive payment to allow you a streamlined assembly of this kit.

This kits price includes USPS 2-3 day priority mail for the fastest most economical delivery for US orders.

   Shipping in the US is FREE All my international orders are handled through eBay's Global Shipping Program as they offer us both the best protection against loss, and damages. Please review their policy for a shipping quote based on your specific location as they don't disclose it to me.

 

  • Condition: New
  • Number Of Axes: 4
  • Input Voltage: 110v-220v
  • MPN: Gecko Spindle 4 Motor 600oz
  • Brand: Gecko Drive

PicClick Insights - Gecko G540 Rev8, & 4 Nema 23 600oz 8mm Dual Shaft & 48v 12.5a Power Supply PicClick Exclusive

  •  Popularity - 116 watchers, 0.0 new watchers per day, 3,247 days for sale on eBay. Super high amount watching. 41 sold, 10 available.
  •  Best Price -
  •  Seller - 2,771+ items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.

People Also Loved PicClick Exclusive