• Excel Dryer XL-BW Xlerator Hand Dryer 120 Volt, Free Quieter Nozzle, Commercial
  • Excel Dryer XL-BW Xlerator Hand Dryer 120 Volt, Free Quieter Nozzle, Commercial

Excel Dryer XL-BW Xlerator Hand Dryer 120 Volt, Free Quieter Nozzle, Commercial

$400.00
Free Shipping
HURRY - only 99999 left!

To Pay by Credit Card, call 888-50-DRYER, Or Checkout through Ebay using PayPal

Here is what is 100% Absolutely FREE with this purchase:

  1. FREE Installed 1.1 Quiet Nozzle to REDUCE Noise by 10 decibles from Original Xlerators
  2. FREE Same Day Shipping. Lightening Fast Delivery! Lower 48 States Only.

 

This listing is for the following hand dryer:

Excel Dryer XLERATOR Hand Dryer XL-BW, 110-120 Volt,  White Thermoset Resin (BMC) Cover, Automatic Sensor, Surface Mounted, LEED Credits, GreenSpec Listed, Commercial Hand Dryer

FEATURES  
Dries Hands Completely in 10 to 15 Seconds
Uses 80% Less Energy 
95% Cost Savings vs. Paper Towels
GREENSPEC® Approved and Helps Qualify for  LEED® credits.
Source Reduction Alternative
Promotes Hygiene
XLERATOR Hand Dryers Help Qualify For LEED Credits.         
XLERATOR Is First Hand Dryer To Be GreenSpec Approved!

 

SPECIFICATIONS


Dimensions:

11 3/4" LG. X 12 11/16" HIGH X 6 11/16" DEEP
(298 MM LG. X 322 MM HIGH X 170 MM DEEP)
Weight:16 LBS. (7.3 KGS.)



Construction
  1. Hand dryer cover shall be a one-piece, heavy-duty, rib-reinforced, die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy paint and fastened to a wall plate by two chrome plated tamper-proof bolts.
     
  2. Hand dryer wall plate shall be equipped with (3) 7/8" (22 mm) diameter holes, one of which shall be suitable for use with surface conduit, for ease of wiring.
     
  3. All internal hand dryer parts shall be coated according to Underwriters' Laboratories, Inc. requirements.
     
  4. Entire mechanism shall be internally grounded.
Mechanism
  1. Hand dryer motor shall be a series commutated through-flow discharge vacuum motor/blower (5/8 HP / 20,000 RPM) which provides air velocity of 16,000 LFM (linear feet per minute) at the air outlet and 14,000 LFM at the hands (4 inches [102 mm] below air outlet).
     
  2. Hand dryer heating element (900 W) is constructed of Nichrome wire and mounted inside the blower housing, thereby being vandal proof. It shall be protected by an automatic resetting thermostat, which shall open whenever air flow is cut off and shall close when flow of air is resumed. It shall produce an air temperature of up to 135°F (57°C) at a 72°F (22°C) ambient room temperature at the hands (4 inches [102 mm] below air outlet).
     
  3. Hand dryer Control assembly is activated by an infrared optical sensor located next to the air outlet. The dryer shall operate as long as hands are under the air outlet. There is a 35-second lockout feature if hands are not removed.
     
Limited Warranty

The hand dryer shall be guaranteed to be free from defects for a period of five (5) years. Warranty shall include factory performed labor as well as the repair or exchange of defective parts, at manufacturer's option.




 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 



WHY BUY FROM US?

  • Check our feedback score.  We have had many happy customers and you can trust us.  We take pride in a quality service.
  • We want your business and will make sure you have a pleasant experience with your purchase.  We are always here to answer questions.

FEEDBACK:

  • We always give positive feedback once positive feedback is left for us. 
  • We normally wait to leave feedback until feedback is left; this allows us to give personal attention to each individual order we receive.

SHIPPING: UPS, usually ships same day as payment received. (No Saturdays, Sundays, or holidays)

 

Visit www.JDsTreasureWorld.com for more great deals!

We prefer Pay pal per eBay rules. Items will not be shipped until payment is cleared.

  • Free Shipping
  • The seller establishes the cost of shipping and cost of shipping insurance, regardless of what any buyer-selected shipping service might charge the seller.
  • Returns Accepted
  • Returns must be properly packaged, uninstalled, in new condition, and in original packaging. Shipping must be pre-paid by customer, and subject to inspection before refunds are issued. Restocking fees apply with all returns and some exchanges. Restocking fees vary depending on the manufacturer. Contact 888-50-DRYER for an RMA number and instructions before returning. Category Five Technologies, Inc. has the right to reject any returns past 60 days the delivery date. All stocked items will be 20%. Items that must be returned to the manufacturer may vary from 20% to 35% restocking fees. Bradley items are only returnable if the item is a "BradEx" item.
  • Money Back
  • Returns must be made within 60 Days
  • Shipping cost paid by Buyer
  • pro-dryers
  • Feedback score: 2336
  • Positive Feedback (last 12 months): 100%

You May Also Like…