LAUNCH X431 Creader CRP919E Code Reader OBD2 Scanner Full System Diagnostic Tools 2 Years Free Update
A/F TPMS DPF IMMO 31 Reset +CANFD For GM after 2020 / DIOP + Active Test + 11 Languages
2022 New Elite Version. All-around upgraded of LAUNCH CRP909/909x/909e
Supports 11 Languages : It supports 11 languages, including English, French, Italian, Japanese, Spanish, German, Russian, Portuguese, Korean, Traditional Chinese, and Polish.
BETTER Settings: top-of-the-line software & hardware of the same product range:
FOR EXAMPLE: If the vapor emission system failure may be due to the EVAP cleaning valve may have been opened or closed after being stuck or short circuit, you can use our LAUNCH 919E scanner to send the command to the vehicle ECU to perform EVAP tests, then diagnose the DTC and read the data stream. Can determine which part of the circuit, control unit, and actuator fails through comparative analysis.
Commonly-Used Active Tests including:
- EVAP Vent / Purge Solenoid;
- Fuel Injector Test;
- Cycling A/C Clutch Relay;
- Cycling ABS Motor Pump;
- Cooling Fan Test;
- Window/Light/Door Lock Actuators/Headlamp Test/Sunroof/Operate mirrors/Turn on the sound horn;
And also can perform other actuation test functions including Modulate the throttle,Turn Off ACC Lane Keeping Assist System (LKAS) ; Turn ON/OFF Front and Rear side ACM Solenoid, Left clutch electromagnetic coil test,Acceleration Device Test,Oil Pressure Control Test DYNAMIC camera aiming,Brake Vacuum Pump, Inlet and Outlet Valve tests, Open Brakes tests, Parking Brake Motors, Wheel Speed Sensor Supply, PARKING BRAKE tests, etc.
*Actuation test functions vary by the vehicle system.
-ISO 14230-4 (KWP2000)
-ISO 11898-1:2015(CAN-FD)
- ISO 13400( DoIP)
-ISO 15765-4 (CAN)
-ISO 9141-2 (ISO)
-ISO 14229 (UDS)
-SAEJ 1850 (VPW & PWM)
LAUNCH CRP919E automotive scanner Read and erase codes for all available systems, turn off MIL light (Indicator light), display live data in text, graph & analog for easy data review.
Engines
Auto Transmission
Airbags
Immobilizer
ABS ESP system
Cruise Control system
Gateway
Body Systems
Steering system
TPMS system
Rain Sensors
4WD System Stabilizer
Intelligent Parking Assist
Audio Radio Systems
Air Conditioning
Central Locking
Electric Windows
Heated Rear Window
Xenon Headlights
Wash Wipe
Fuel Burning Heater
Seat & Door Motor system
Electronic Throttle system
Electronic Spark System ......
1. Steering Angle Reset
Reset the steering angle to zero to keep the car running straight.
2. Injector Coding
Write the new injector code into the car system for the correct cylinder injection quantity.
3. IMMO Matching
Disable any lost keys and add new keys. **ONLY for cars with an easy IMMO system.
4. DPF Regeneration
Especially works for D-P-F system with D-P-F regeneration, D-P-F component replacement teach-in and D-P-F teach-in after replacing the engine control unit.
5. A/C relearn
The vehicle air conditioner replaces the electronic control unit, replaces the actuator or the memory of the electronic control unit memory is lost, and requires air conditioning initialization learning.
6. ABS Bleeding
Help exhaust the air after repair the ABS pump system.
7. AdBlue Reset
Reset urea after the diesel exhaust treatment fluid is replaced or filled up.
8. Throttle Matching
Initialize the throttle actuators to the default state.
9. TPMS Reset
Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.
10. Tire Reset
Set the size parameters of the modified or replaced tire.
11. AFS Headlamp Reset
Initialize the adaptive headlamp system.
12. Sunroof Initialization
Initialize the sunroof when locked off or closed.
13. Battery Reset
Register the battery after replacement.
14. Seat Calibration
Calibrate the memory in replaced or repaired seats.
15. Oil Reset
Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.
16. A/F Reset:
Set or learn Air/Fuel ratio parameters.
17. GEARBOX LEARN
Help complete the gearbox self-learning to improve gear shifting quality.
18. Transport Mode
Deactivate the transport mode.
19. Windows Calibration
Perform door window matching to recover ECU initial memory.
20. Language Change
Change vehicle system language.
21. Suspension Reset
Adjust the vehicle body height sensor for level calibration.
22. NOx Sensor Reset
Reset catalytic converter learned value stored in ECU.
23. Stop/Start Reset:
Set up the automatic start-stop function in ECU.
24. Coolant Bleeding
Activate the electronic water pump.
25. Brake Reset
It is important in the maintenance of electronic braking system's safety and efficiency.
26.Gear Learning
The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.
27. RESET EGR
EGR Adaption is used to learn the EGR (Exhaust Gas Recirculation) valve after it is cleaned or replaced.
28. RESET HVOLBAT
High Voltage Battery Detection is used for high voltage battery diagnosis and status information
detection.
29. RESET ENGPBM
Engine Power Balance Monitoring is used to monitor crankshaft acceleration in the power stroke of each cylinder, to determine the relative power provided by each cylinder.
30. RESET GPF
31. RESET ICCS
ALL 10 Mode OBDII/EOBD Functions:
1.Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs) 2.Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors. 3.Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data. 4.I/M Readiness Status : Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing. 5.Read Live Data Stream : Show the information of continuous data stream from a vehicle in live graphic (waveform) display. 6.View Freeze Frame Data : Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs. 7.O2 Sensor Test : Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer. 8.On-Board Monitor Test : Retrieves and displays test results for emission-related powertrain components and systems. 9.Read Vehicle Information :Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc. 10. Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability. LAUNCH CRP919E Features:>>>Professional Fast Identifies VIN Number:
Once connect with car OBD2 port , CRP919 will AutoDetect car Vin number. Give you a quick access to start the vehicle system detection. >>>Perfect Performs Vehicle Battery Analysis For 12V car, SUV, Van, Light Truck, Pickup. Detect real-time data from 12V batteries and display BATTERY DATA with fluctuations ranging from 8V to 16V. The discharge voltage of a normal battery is about 12V, the starting voltage is generally 12V, and the charging voltage is about 14V. >>>One-Key I/M Checking It support one-key I/M checking for all available emission systems.Help your car pass the emission test simpler.
CRP919E OBD2 scanner can do deep dive into auto diagnostics and also generate the Live Data Stream.
Live Data Stream Graphing provides very detailed data stream data, it could include the change of Accelerator Pedal Position Sensor1 , Actual Output Shaft Speed , Clutch A Actuator Motor , Vehicle Battery and so on. Graphical data allows you to analyze the data changes of each module more clearly and easily, and it is easier to see the problems in it.
Live Data Stream Record allow you to record the live data stream and view the data of a certain point in a targeted manner. So that you can view the data more clearly.
Live Data Stream Playback. After you have recorded the data for a period of time, if you want to view and analyze the data just recorded, you need to use data stream playback function to help you. You can view the data at any time you recorded. Then you can choose " Combine", " Report" and " Record".
Live Data Stream Sharing will let you share any data status and content you want to display anytime, anywhere. You can send it to your friend or mechanic to help you solve complex problems.
One-Click Generate Health Report
Technical Detailed
• Screen Size:7" Touch Screen
• Operating System:Android 5.0
• Resolution:1024*600 pixels
• Battery Capacity:6000mAh
• RAM: 3GB
• ROM: 32GB
• Size:251.4mm x 150.6mm x 40.4mm
• OBD II Input voltage range: 9~18V
• Charging via: DC 5V charging cable & power adaptor or Diagnostic cable through connection to vehicle's DLC
• Working Temperature: -10 to 50 (14 to 122 )
• Storage Temperature: -20 to 70 (-4 to 158 )
Packing List
1.CRP919E Diagnostic Tool x1
2. OBD II Diagnostic Cable x 1
3. DC 5V Charging Cable x 1
4. US Plug Adapter x1;EU Plug Adapter x1;UK Plug Adapter x1
5. Multilingual Quick Start Guide x 1
6. User Manual x 1
7. Carrying Case x 1
PaymentDelivery detailsTerms of salesAbout usContact usPaymentWe accept PayPal payment.
Please contact us if you need to use another method to pay.
Payment should be made within 7 days after bidding ends.
Otherwise a Unpaid Item case will be opened to you.
Delivery detailsShipping
Order will be shipped within 1 business day after payment confirmed.
We have warehouse in USA,UK,HongKong,Australia,Russian,Germany and China warehouse.
From our US/UK/RU/DE/AU warehouse via UPS or DHL eCommerce shipping
Delivery time varies from 2 to 6 business days.
From our Hong Kong warehouse via DHL or FedEx Ground
Delivery time varies from 3 to 5 business days.
From our China warehouse
For US buyers, we use e-Packet (Delivery time is 5-12 business days) or express delivery(Delivery time is 3-7 business days) .
For other countries' buyers, we use China Post or Hong Kong Post(Delivery time varies from 10 to 25 business days)or Express delivery(Delivery time is 3-7 business days).
We will ship according to your PayPal address.
Please make sure it is correct and include phone number for delivery .
If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem.
Please include your special requests in eBay note if there is any.
Terms of salesWe are authorize distributor, our all items are 100% original and Our devices have warranty, 12 months free repair for the devices. 3 months for the accessories.
Please contact us firstly when you need warranty service.
In case an item arrives faulty, please contact us as soon as possible and keep it unused.
We will instruct you on how to return and get refund or replacement.
If the item has been used, we have the right to decline your claim.
Items should be returned on buyers' cost for repair or replacement.
About us Who We Are? We are specialized dealer of On-Board Diagnostic tools and automotive electronics for more than 10 years. We are authorized first class distributor of Launch, ThinkCar, Ediag and OBDSTAR brands, and more brands will be show in our store in near future. What Do We Have? We have office and warehouse in Australia and US to ensure fast shipment and after-sale service. We have more than 50 employees devoting to customer satisfaction. Terms of tax: We are not responsible for buyer's local taxes, please consult your local Customs for tax details. Contact us Our customer-oriented service strives for positive feedbacks with all 5 star selling ratings. Please feel free to contact us via eBay message once you have any question before you giving us negative feedback or open case. We will reply in 24 business hours. Business time: GMT8 (9:00-18:00) from Monday to Friday.