*For Turn Signal lights, Load Resistors may be required to avoid hyper flashing
Few vehicles may require decoder to eliminate error code
Bright Safe CoolSee our other items
Q: Do I need a load resistor for my LED turn signal light?
A: Yes, Load Resistors are required to avoid hyper flashing by helping your vehicle read a correct current unless you have an electronic flasher relay installed.
FAQ for LED Headlight /Fog Lights /DRL FAQ for Alla Lighting LED LightsQ: Do I need a decoder for my LED headlights, foglights and DRL?
A: For most newer vehicles in certain brands, including most European brands, Dodge, Jeep... Yes, Decoders or Resistors are required to eliminate Error Code or Flickering.
Q: Are they plug and play?
A: Yes, unless your vehicle requires additional adapters to secure LED bulbs in place, the most common one is vehicle with a H7 bulb. Please contact us Alla lighting for more support.
Q: Will they fit my vehicle?
A: If your vehicle does not show up on the compatibility table at the top of our listings, please feel free to contact us get the correct bulb.
---(Set of 2) 8000 lumens(4000 lumens per bulb) without dark spots; Color: 6000K ~ 6500K cool white. ---Newest technology 6063 aviation aluminum heat sink design and double way heat dissipation for longer life span & further light output area. ---Works underwater! Rainproof driver, housing, and fan works even in extreme situations: Driver and connectors level IP65 ---Lift span: More than 30,000 hrs in 25°C ambient; Mini Design, easy installation and fitment. For most vehicles, just directly plug-n-play, yet for some European vehicles or newest vehicles, it may require to install the load resistors to avoid the error code or blinking. ---Application: Used for upgrading the stock dual high and low beam headlight replacement. Cross reference number: 9004, HB1, 9004LL, etc. --- [ ] (https://www.ebay.com/itm/Top-quality-US-seller-100-Satisfaction-Tech-support-/183159565973) --- [ ] (https://www.ebay.com/itm/Top-quality-US-seller-100-Satisfaction-Tech-support-/183172723551) --- [ ] (https://www.ebay.com/itm/AllaLighting-39-LED-7443-Strobe-Flash-Blinker-Brake-Light-Bulb-Lamp-Safety-Alert-/183340478914) --- [ ] (https://www.ebay.com/itm/Alla-Lighting-10000lm-9007-LED-High-Low-Beam-Headlight-Light-Bulbs-Lamps-White-/183159434782) --- [ ] (https://www.ebay.com/itm/Alla-Lighting-X3-LED-9012-Headlight-High-Low-Beam-Light-Bulbs-Lamps-White-Blue-/183162862111) --- [ ] (https://www.ebay.com/itm/Alla-Lighting-3200lm-6000K-27-LED-H11-Fog-Light-Driving-Bulbs-Lamps-Xenon-White-/183166040645) --- [ ] (https://www.ebay.com/itm/Alla-Lighting-9000LM-F2-H11-Main-Low-Beam-Headlight-LED-Bulbs-Lamps-White-Kit-/183203574664) Your Safty, We Care Lumens {Lumens} LED Chip Quantity {Q} Color Temperature 6000K Plug and Play Yes**For Turn Signal lights, Load Resistors may be required to avoid hyper flashing
Few vehicles may require decoder to eliminate error code
High Quality Fast Shipping Best Offers 1 Year Warranty Bright Safe CoolSee our other items
FAQ for Alla Lighting LED LightsQ: Will they fit my vehicle?
A: If your vehicle does not show up on the compatibility table at the top of our listings, please feel free to contact us get the correct bulb.
Q: Are they plug and play?
A: Yes, unless your vehicle requires additional adapters to secure LED bulbs in place, the most common one is vehicle with a H7 bulb. Please contact us Alla lighting for more support.
FAQ for LED Headlight /Fog Lights /DRLQ: Do I need a decoder for my LED headlights, foglights and DRL?
A: For most newer vehicles in certain brands, including most European brands, Dodge, Jeep... Yes, Decoders or Resistors are required to eliminate Error Code or Flickering.
FAQ for LED Turn Signal LightsQ: Do I need a load resistor for my LED turn signal light?
A: Yes, Load Resistors are required to avoid hyper flashing by helping your vehicle read a correct current unless you have an electronic flasher relay installed.