www.oeltd.com HUL Classic Ingersoll Rand 2,500lb Air Tugger
These Tuggers are completely torn down to the plates, gears, and cleaned, then blasted to the metal and 1st coat primer International zinc 52, all worn parts are changed or replaced and machined if needed, replace rings, pistons, cylinder sleeves, bearings, seals, bushings, and anything else out of specifications while rebuilding. We also reline the brake band and resurface the drum brake face as needed. After assembled 2nd coat primer PPG epoxy, and the final paint we use International poly urathane finish paint. This process helps protect from harsh weather enviroments we are used to in the Gulf of Mexico and Gulf Coast area as well as salt mines. Now the winch is not complete untill we load test to factory specifications and more and comes with a certificate of test. We back this with a 90 day warranty for quality all workmanship same as the manufacturer. Please email or check out our web site for more information.
2,500lbs. Capacity Air Winch @ Mid Drum (HUL)
Winch Model: HUL Manufacture: Ingersoll Rand
Weight (lbs.): 561 (W/O Cable)
Line Pull (lbs.) 2,500 Line Speed (fpm) 110
(Nominal Capacity) Drum Root Dia: 7"
Wire Rope Dia.. (in.) 1/2" Motor HP: 11
Rope Anchor Hole Dia.: 1/2" Avg. CFM Required: 175
Full Drum Capacity 820' (1/2" wire rope) Drum Length 15"
(First Drum Layer @ 90 PSI) Max Stall Pull (lbs.) 5,000
(Mid Drum Layer @ 90 PSI) 2,500 LBS
call 866-558-5586 or firstname.lastname@example.org