CBH BUDDHA SCEPTER Chinese Brass Hardware Door Pulls 3"

Sold $17.84 Buy It Now, $8.35 Shipping, 60-Day Returns, eBay Money Back Guarantee
Seller: hardwarephilosophy ✉️ (3,416) 100%, Location: Nevada, US, Ships to: US & many other countries, Item: 141966441399 CBH BUDDHA SCEPTER Chinese Brass Hardware Door Pulls 3". CBH BUDDHA SCEPTER Chinese Brass Hardware Door Pulls 3"

CBH BUDDHA SCEPTER Chinese Brass Hardware Door Pulls 3"

These beautiful pulls are perfect for a large drawer or the front of a cabinet. The plate is inscribed with a "ruyi", a cane carried by the Buddha and a symbol of good luck.

  • Total assembled measurement is 2.91"W x 3.74"H x 0.91"D (74mm x 95mm x 23mm)
  • Pull measurement is 2.36"W x 2.36"H x 0.2"D (60mm x 60mm x 5mm)
  • Washer Diameter measures 1.57" (40mm).
  • Includes a set of 2.4" (60mm) soft joining pins
  • Set of 2
Item AH-0071

Installation Guide

Chinese brass hardware is easy to install. The first thing to get familiar with are commonly used joining pins:

Soft Joining Pins Made of bendable metal tongs that can be bent and hooked into the opposite side of the wood. Normally used for pulls, handles, and other items where lateral pulling strength is required.

Hard Joining Pins Made of thick metal tongs that can be bent but not hooked around the opposite side of the wood. Normally used for bolts and hooks where vertical strength is required.

Nailing Pins Made of one long, straight metal spear that is nailed into the wood. Like hard joining pins, they are used for bolts and hooks where vertical strength is required.

You'll need a few basic tools:

  • Needle nose pliers (recommended - but any type of pliers will do.)

  • Hammer

  • Drill bit (same width as the pin you're going to install)

  • Power drill

Installation of Soft Joining Pins

For this example, we've chosen a classic fish pull to install.

Drill a hole the same width as the pin. In this example we're drilling a 1/4" hole for a 1/4" wide pin.

Assemble your piece of hardware and insert in the hole.

Using the needle nose pliers, bend the tip of the pin over so that it's pointing towards the wood.

Making sure that the display side of the piece is pulled tight, nail the end of the pin into the wood.

Nail the pin flat.

Installation of Hard Joining Pins

In this example we've chosen a cabinet face plate to install.

Drill a hole the same width as the pins. In this example we're drilling a 1/4" hole for a 1/4" pin.

Assemble your piece of hardware and insert in the hole.

Using the needle nose pliers, spread the pins flat against the wood.

Making sure that the display side of the piece is pulled tight, nail the pin flat against the wood.

Note: Unlike soft folding pins there's no need to hook the end of the pin into the wood - just nail it flat.

Installation of Nailing Pins

In this example, we've chosen a cabinet strip pull to install.

Drill a hole the same width as the pins. In this example we're drilling a 3/16 " hole for a 3/16 " pin.

Assemble your piece of hardware. Hammer the nailing pin into the pilot hole. We recommend using a piece of wood as a buffer to avoid damaging the hardware.

It's usually a good idea to file or clip the end of the nailing pin down if it is protrudes out the opposite side of the wood (this can be done before installation as well).

Nailing pins are as strong as very thick nails.

  • Material: Brass
  • UPC: 810126019998

PicClick Insights - CBH BUDDHA SCEPTER Chinese Brass Hardware Door Pulls 3" PicClick Exclusive

  •  Popularity - 5 watchers, 0.0 new watchers per day, 1,173 days for sale on eBay. Super high amount watching. 13 sold, 0 available.
  •  Best Price -
  •  Seller - 3,416+ items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.

People Also Loved PicClick Exclusive