BOSS Audio Systems R1100MK 1100W 8 Gauge Wiring Kit | Certified Refurbished

$115.18 $59.99 Buy It Now, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: Top-Rated Plus Seller speeceinc ✉️ (9,568) 98.7%, Location: Oxnard, California, US, Ships to: US & many other countries, Item: 285282533844 BOSS Audio Systems R1100MK 1100W 8 Gauge Wiring Kit | Certified Refurbished.

Enjoy clear sound with the BOSS Audio Systems R1100MK Monoblock Class A/B Amplifier and 8-gauge wire installation kit.

With 1100 Watts Max Power and MOSFET power supply, this 4-Ohm Amplifier provides clean sound to give your music an extra boost.

The included amplifier installation kit gives you everything that you need to bring power to your subwoofer. Riot amplifiers are great for enhanced sound and performance for all 12V applications at an affordable price.

  • Class A/B, Monoblock, MOSFET power supply
  • 1100 Watts @2-Ohms x 1 channel Max power, 550 Watts @4-Ohms x 1 channel
  • High and low level inputs, Power and protection LEDs
  • Thermal overload speaker and short protection
  • Variable Low Pass Crossover, Switchable Bass Boost
  • Variable input gain control
  • Dimensions: L 9.1 x W 10.4 x H 2.3, Weight: 4.4 Lbs.
  • Remote Subwoofer Control

MOSFET Power Supply

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high-efficiency output.

Class A/B

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

2 Ohm Stable

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

High and Low Level Inputs

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Switchable Bass Boost

Switchable Bass Boost allows you to boost the low bass +18db.

Subwoofer Level Control

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Variable Gain Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Power Input Terminals

When installing all Boss Audio Systems amplifiers, it is important to use the MAXIMUM gauge of wire that the power terminals will accommodate. For instance, if an amplifier has 4 gauge power and ground terminals, use high quality 4 gauge multi-strand copper wire to make your power connections. This maximizes the amplifier’s ability to draw the required power upon demand. This also helps prevent overheating that could cause failure. ALWAYS make sure your vehicle’s electrical system is capable of handling the current demands from any after-market accessory.

Please refer to the amplifier’s owner’s manual for correct wire gauge sizes.

Fuses

Fuses protect BOTH the amplifier and the electrical system of your vehicle from faulty conditions.

If you must replace a fuse on the amplifier, always use a fuse of exactly the same type and rating of the one you are replacing. A different type of fuse or rating may result in damage or cause a fire. Please refer to your owner’s manual for reference on fuse size and type.

If you plan on using multiple amplifiers in your system, be certain that you have the appropriately sized gauge wire to accommodate the current demands for all amplifiers and that the wire is fused correctly at the battery. Connect an empty fuse holder within 18" (45 cm) of the car battery and run a 4 gauge (or heavier) cable from this fuse to the amplifier location. A fused distribution block is recommended when using several amplifiers or accessories.

Proper Grounding

Proper grounding is essential for any electric accessory in a vehicle.

Some key points to remember: Keep the ground as short as possible. Connect the amplifier’s power ground terminal to the closest point on the chassis of the car. Keep this ground wire to less than 39" (100 cm) in length. Use 4 gauge (or heavier) wire. Scrape any paint away, use a star washer to “bite” into the metal and secure it tightly using a grounding lug.

Any steps that aren’t followed properly will result in a higher resistance at the ground point, causing unnecessary heat, high current draw, and potentially damaging the electrical accessories in the vehicle.

Gain / Input Sensitivity

The “Gain” or “Input Sensitivity” selectors on an amplifier are not to be mistaken for a volume setting. This setting allows users to match the gain from the source unit.

To set these selectors properly, you must “defeat” any processing on your source unit. In other words, make sure Bass, Treble, and Subwoofer levels are set to “0” on your source unit before adjusting the gain or input sensitivity selector on your amplifier.

  • Condition: Certified - Refurbished
  • Brand: BOSS Audio
  • Model: R1100MK
  • MPN: CRR1100MK
  • RMS Power: 825W
  • Channels: Mono
  • UPC: 0791489124935

PicClick Insights - BOSS Audio Systems R1100MK 1100W 8 Gauge Wiring Kit | Certified Refurbished PicClick Exclusive

  •  Popularity - 212 watchers, 0.7 new watchers per day, 322 days for sale on eBay. Super high amount watching. 139 sold, 3 available.
  •  Best Price -
  •  Seller - 9,568+ items sold. 1.3% negative feedback. Top-Rated Plus! Top-Rated Seller, 30-day return policy, ships in 1 business day with tracking.

People Also Loved PicClick Exclusive