(10) Ten Box Sample Containders per Pack
Bituminous (Asphalt) Box Sample Containers Measuring 3.75” x 4.75” x 9.5”
per the Pennsylvania Test Method No. 746 for ¾” 19mm Nominal Maximum Aggregate Size dated December 2011. Please see specification below.
Commonwealth of Pennsylvania PA Test Method No. 746
Department of Transportation December 2011
MATERIALS AND TESTING DIVISION
Method of Test for
SAMPLING BITUMINOUS PAVING MIXTURES
1.1 Loose Mixture Samples (Box Samples) - These methods cover the procedures for
sampling mixtures of bituminous materials with mineral aggregate as prepared for use in paving.
The samples shall be used for either of two purposes:
To represent an average bituminous mixture for acceptance purposes.
1.1.2 To ascertain the periodic variations in characteristics of the mixture for the
purpose of quality control.
2.2.1 For 3/4" (19 mm) and smaller Nominal Maximum Aggregate Size (NMAS) mixtures, use cardboard boxes dimensioned approximately 3 3/4 inches x 4 3/4 inches x 9 1/2 inches.
Any questions please feel free to contact us.