Seller:calicoolstuff63✉️(620)99.6%,
Location:San Diego, California, US,
Ships to: US, IE, CA, GB, FI,
Item:196305021153Vintage Oberdorfer Bronze Pedestal Mount Gear Pump 1/2" NPT Ports w/ Pulley. Overall Good condition for this vintage bronze Oberdorfer Gear Pump with pulley. Untested, but shaft spins freely and impeller gears mesh as they should. Shaft has normal in/out play. Shows signs of use with patina and wrench marks. Typically used as a utility water pump aboard a vessel, can be easily powered off of main engine with attached pulley. Body, with 1/2" NPT threads, is about 4"tall x 7-1/2" long to end of shaft. Shaft is 5/8". Mounting takes 3/8" bolts. Has 2 blow-out zinc fittings fore and aft of body. Body has "450" stamped in to top. Probably a GPH (gallon per hour) rating. There is a "50" is the body casting under shaft area. Pulley outside diameter is about 3-1/2" and takes a 1/2" wide belt. Please see pictures for details. Please see store for more marine bronze hardware. Please ask any questions before bidding. Sold as-is with No Warranty, it may leak. Ships insured. Thanks for stopping by and please check out my store for a lot more vintage and antique stuff! AK / HI / US TERR email for shipping.
Condition:Used
Condition:Overall Good condition for this vintage bronze Oberdorfer Gear Pump with pulley. Untested, but shaft spins freely and impeller gears mesh as they should. Shows signs of use with patina and wrench marks. Typically used as a utility water pump aboard a vessel, can be easily powered off of main engine with attached pulley. Please see pictures for details.