This pump is used primarily as Cellar pump. it's provides protection from flooding.They are also used whenever water has to be moved from one place to another, e.g.in the home, agriculture, horticulture, plumbing and many other applications.
Cleaning the impeller : If excessive deposits collect in the pump case you must dismantle the bottom part of the pump as follows:
1. Undo the 4 screws from the bottom of the intake cage.
2. Remove the intake cage from the pump case.
3. clean the impeller with clear water.
4. Assemble in reverse order
Multi OutletThere with 3 different outlet (1 inch ,1-1/4 inch, 1-1/2 inch ) , can choose from according to the flow rate , The bigger the flow is, the wider the outlet should be. |
Handle GripThere is an air vent on the pump so when the pump is working, there will be water leaking out from here, this is a normal phenomenon, please do not care |
Auto Float SwitchWhen the water level rises above the pump, the pump will automatically start working under the control of the float switch. When the water level is below the pump, you should lift the float for pumping. Note: Once the pump fails to pump water, you should immediately lower the float switch or cut off the power. Otherwise, it will cause the coil to burn out. |
Base PlateA certain height of the base can avoid other impurities being sucked into the impeller when the pump is working. |