LAUNCH X431 PAD VII XPROG3 Car Diagnostic Scanner Tool IMMO Key Programming TPMS

$529.00 Buy It Now, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: Top-Rated Plus Seller toolsdiagobd ✉️ (194) 97.6%, Location: Los Angeles, California, US, Ships to: US & many other countries, Item: 195332871223 LAUNCH X431 PAD VII XPROG3 Car Diagnostic Scanner Tool IMMO Key Programming TPMS.
LAUNCH X431 PAD VII XPROG3 Car Diagnostic Scanner Tool IMMO Key Programming TPMS

 


LAUNCH X431 PADVII E/CU Programming & Coding,Top Automotive Diagnostic Scanner with ,60+Special Functions Scan Tool,Intelligent Diagnostics,Dual Wi-Fi,Upgraded of X431 V+/PRO5/PROS V/PADIII

X-431 PAD VII is an unexpected high-end diagnostic, comes with a 13.3 inch large touch screen, 32 service functions and Smartlink remote diagnosis. Equipped with the 2.0GHz Octa-core optimized chipset, Android 9.0 operating system, 8G memory and 256G large storagememories, X-431 PAD VII makes your intelligent diagnosis faster than ever.

Product advantages

1. Larger memory (8GB), smoother operation; strong light readable screen; support for three defenses 2. Support 9 kinds of module expansion such as oscilloscope, sensor, battery, tire pressure gun, endoscope,PRO G3, etc. 3. Support smartlink remote diagnosis 4. Support D-PDU/J2534/RP1210 diagnostic standard, CAN/CAN FD/DOIP protocol.

BULLET POINTS:

Meet LAUNCH X431 PAD VII :The phenomenal all-in-one diagnostic scanner, the newest upgraded scan tool of ProS V, V+, PAD III/V in X431 series. All set to top-notch standards to make your  Programming/Coding, 35+ Reset Services, 60+ Special Functions, Active Test, All System Diagnostics, Topology Mapping, DTC Troubleshooting Guidance, OBDII Connector Pin Detection, etc. accurate, efficient and OE-level approved. Together with worldwide car coverage of 110 brands (J2534/RP1210/D-PDU/CAN/DOIP/CAN FD) + 30 days unconditional return & replacement policy + 1 years product quality backup.

J2534 Programming : This diagnostic tool comes with SmartLink CVCI box as a pass-thru tool to connect with OEM software for effective J2534 programming, to replace the existing software/firmware in the , program new , and fix software-controlled driving performance and emission issues. Available for VAG Group Vehicles, Benz, BMW, and Porsche etc, without use of often very expensive factory automotive scan tools. **Reach us for details.

E/CU Programming & Coding : This diagnostic tool comes with SmartLink CVCI box as a pass-thru tool to connect with OEM software for effective J2534 programming, to replace the existing software/firmware in the , program new , and fix software-controlled driving performance and emission issues. Coding for Component Matching after replacement, or reflashing modules to active features / deactivate hidden features, without use of often very expensive factory automotive scan tools. **Reach us for details.

Support Latest Car Protocols : To diagnose the complex issues for passenger cars and even trucks, SmartLink CVCI Box is developed as a smart solution to support wide array of diagnostic protocols (J2534/RP1210/D-PDU - for passenger cars and commercial vehicles; CAN/DOIP/CAN FD - the latest protocols), covering U.S., Asian and European markets over 110 brands, and is continually updated. You may go to the “MALL” module to make in-app purchase of HD vehicle software.

OE-Level Diagnostic Tool : 35+ Reset & Relearn Services (Oil Reset, Injector Coding …) for necessary repairs and adjustments in workshop; 60+ Advanced Special Functions (PMI, Power Balance, Online Calibration, Online Account Login Service …) for complete diagnostics to help grow customer base. Meanwhile, 8 extended modules include Videoscope, Oscilloscope, SensorBox, TPMS Tool, Key Immobilizer and Battery Tester. This pro-level diagnostic scanner has everything to meet your various diagnostic needs and scenarios. **See details on page.

User-Oriented Diagnostic Scanner ①Factory-level All System Diagnostics: in-depth inspection of all accessible car modules as, transmission, ABS, airbag, EVAP, TPMS, BMS, etc. to troubleshoot complex manufacturer-specific issues; ②Topology Mapping: check DTCs and all systems communication status visually. ③Merged 4-in-1 Live Data Graph: effortlessly detect problems during a test drive; ④Auto-detects the communications protocol; check OBDII connector pin damaged or not.

Great Combination : Based on Android 9.0 O.S, powered by fast 2.0GHz Octa-core optimized chipset, with visually stunning 13.3” 1920*1080 touchscreen, 2.4/5Ghz dual Wi-Fi connection, 32GB+128GB expandable on-board memory, 9360mAh battery (20+ continuous work), AutoVIN & AutoSCAN (2006+), one-touch 2 years software upgrade (no charge), massive built-in repair materials, etc., this 2021 newest diagnostic tool of LAUNCH X431 line makes your intelligent diagnosis faster than ever.

   

Feature

1. Full system vehicle coverage for U.S., Asian and European markets over 110 brands, which is continually updated

2. Upgrade and expand the X-431 PAD VII with more software and service via the new module 'MALL' as demanded

3. Real-time voltage display helps technician to monitor the voltage condition of vehicle during the diagnosis

4. Topology mapping gives a visual checking on DTCs and all systems communication status

5. Support automotive communication protocols CAN/CANFD/DoIP and automotive communication standards J2534/D-PDU/RP1210

6. Auto-detects the communications protocol of the vehicle and assist to check automotive OBDII port pin damaged or not

7. Intelligent diagnostic enable identify VIN automatically and access system quickly

8. Guided function for VW and AUDI

9. Optional ADAS calibration function increases more revenue

10. Advanced coding and programming function

11. An extended solutio to support TPMS service

12. 2.4GHz & 5GHz dual band communication ensures quick and stable connection

13. Empower technician to diagnose light, medium & heavy duty vehicles with Smarlink C

14. The basic functions include read & clear DTC, remote diagnosis, Bi-directional control, live data graph, wireless software update etc.

15. Build-in repair information and training video modules help to track and fix issue fast

 

60+ Special Maintenance Services:

VAG Guided Functions: Skip the Security Access Code & Channel Number to perform matching, calibration, and basic settings for VW / Audi / Skoda / Seat.

Component Matching: Rematch (control module unit) after the replacement for VW / Audi / Skoda / Seat / BMW / Chrysler / GM / Ford / Opel / Mazda / Fiat / Honda / Nissan / Hyundai / Kia / Subaru etc.

Power Balance: Identify the less productive cylinder for Chrysler / GM / Ford.

Programmable Module Installation (PMI): Ensure the correct software/calibration and configuration data are loaded onto the new module after replacement for Ford / Mazda.

Personalization: Compatible with BMW / Porsche / Toyota / Subaru.

Online Calibration: For some car systems’ calibration. Compatible with VW / Audi / Skoda / Seat.

Online Account Login Service: Access to the login codes for coding, matching, and basic settings of all available systems.

Online Parameterization … and many more are coming soon; expanding regularly.

35+ Reset & Relearn Services

Oil Reset, Injector Coding, Brake Reset, SAS Reset, BMS Service, ABS Bleeding, Throttle Matching, TPMS Reset, DPF Reg, Gear Learning, AFS Reset, EGR Adaption, Gearbox, Sunroof, SUS Reset, Windows Calibration, Seats Calibration, Language Change, A/F Reset, Coolant Bleed, Transport Mode, Adblue Reset, NOx Sensor Reset NOx, Stop/Start Reset, Headlamp Fitting, Seat Matching, Door & Window Initialization Study, Air Suspension Matching, Multimedia Video Reset, Cluster Reset, Immobilizer Service, Tire Change, and more.

**Cover the majority of makes and models worldwide up to 2018/2019/2020/2021; still growing.

**Function menus vary by your vehicle’s make, model year.

8 Extended Modules Design to Expand Your Business Horizons

This LAUNCH X431 diagnostic tool PAD VII supports 8 extended modules including:

  • VSP-600 VideoScope: for up-close visual inspections in confined areas.
  • X-PROG & X-PROG3 Immobilizer: for lock-smith level key programming & IMMO service.
  • S2-2 SensorBox: diagnose and simulate vehicle sensor faults quickly.
  • O2-1 ScopeBox, Oscilloscope: quickly acquire the circuit signal, and slowly display the waveform to observe and analyze.
  • Wi-Fi Printer: print out diagnostic data & reports.
  • X431 TSGUN: activate all sensors, relearn & program LAUNCH sensors.
  • BTS360 Bluetooth Battery Tester: get a thorough test of the vehicle battery.

**Need extra costs to buy these 8 extended function modules.

 

Programming & Coding for Ultimate Car Diagnostics

Programming

The CVCI box can be used as a J2534  programming tool, a SAE J2534-1 & -2 compliant pass thru a reprogramming interface device, to help upgrade the OEM software and replace the existing software/firmware in the Electronic Control Units (). Program new  and so fix software-controlled drivability and emission issues.

Coding

Component Matching: You can use this LAUNCH X431 diagnostic scanner to re-flash the vehicle control modules, clear the original memories stored in , and write the adaptive data into specific components. And so to build stable communication between modules after repair or replacement.

Activate / Deactivate Functions: You can also use this scan tool to alter how your vehicle behaves originally - disable some annoying functions, or unlock high-end car features as following:

>> Deactivating the Start/Stop function | Beeping when unlocking and locking | Locking the doors once a certain speed is reached (e.g. from 15 km/h) | Seatbelt warning sounds | Mirrors automatically folding and unfolding | Closing the windows after locking the car door with the key | Flashing the brake lights during emergency braking | Activating/deactivating daytime running lights | Changing the brightness of daytime running lights | Flashing of the headlights when locking or unlocking the doors via the remote control | Flashing of the headlights when the alarm system is triggered | Displaying of the real speed via GPS signal | Displaying the amount of fuel consumption at a given speed | Changing the brightness of the dashboard | Displaying the optimal gear changing time in eco or sport mode | Select whether the display should be on the dashboard or head-up display | Incoming call display | And many more …

** NOT universally compatible. Function menus vary by your vehicle’s make, model, year.

Topology Module Mapping

The Smart Topology Module Mapping in this diagnostic tool allows you to directly view the color-coded topology display for all communication structures between vehicle modules, and click to check the fault code, saving the hassle of toggling menus back and forth to find what you want.

99.99% Vehicle Coverage, the Maximum on the Market.

This automotive scanner comes with different adapters, and supports new protocols of CAN/CANFD/DoIP, and new communication standards of J2534/D-PDU/RP1210, covering 99.99% of the vehicle models (including Heavy Duty Vehicle brands) made in the USA, Europe, Asia, to meet the needs of diagnosing almost every vehicle coming into your workshop:

Passenger Vehicles:

  • USA: Compatible with USA Ford/ Lincoln, GM/ Buick/ Cadillac/ Chevrolet, Chrysler/ Dodge/ Jeep.
  • Asia: Compatible with Toyota/ Lexus, Honda/ Acura, Mazda, Subaru, Nissan/ Infiniti, Mitsubishi, Hyundai, Isuzu, Daihatsu, KIA, Daewoo, Suzuki, Proton, Tata, Mahindra, Ssangyong, Perodua, Maruti
  • Europe: Compatible with Audi, Mercedes/ Maybach, BMW/ MINI/ Rolls Royce, VW/ Bentley/ Bugatti, Opel/ Vauxhall, Peugeot, Citroen, Volvo, Sprinter, Renault/ Dacia, Fiat/ Romeo/ Abarth/ Lancia, Rover, Landrover, Saab, Seat, Skoda, Smart, Maserati, Ferrari, Arston Martin, Porsche, Jaguar
  • Australia: Compatible with AUST Holden, AUST Ford.

Heavy-Duty Vehicles (Optional):

Compatible with Nissan (Diesel)/ Mitsubishi (Diesel)/ USA Ford Diesel, Kenworth/ Astra, Benz Heavy Duty, Bosch Diesel, China Heavy Duty, Cummins Heavy Duty, DAF, Delphi Diesel/ Denso Diesel, FAW Liberation, Foton Auman, FUSO, Hino, Hyundai Heavy Duty, Isuzu Heavy Duty/ Iveco Heavy Duty, JAC Heavy Duty, Mack, MAN …. **Need to make an in-app purchase of the heavy-duty vehicle diagnostics software you need; reach us 24/7 for details.

Specification

 

X-431 PAD VII

Smartlink

Operation System

Andorid 9.0

N/A

CPU

2.0GHz Octa-core

N/A

Display

13.3' touch screen 1920*1080

3.5' touch screen  320*480

Memory

8GB

256M

Storage

256GB

8GB

Camera

Rear 13MP, Front 8MP

N/A

WiFi

Dual Band 2.4 & 5GHz

Dual Band 2.4 & 5GHz

Diagnostic Communication

WiFi

WiFi & BT & USB

Working Temperature

0℃~50℃

0℃~50℃

Dimension

353*236*71 mm

204*110*45 mm

         

 

 

 

Launch X-Prog 3 Advanced Immobilizer & Key Programmer
X-PROG 3 advanced immobilizer & key programmer is a powerful chip reading device that can read/write keys to the vehicle. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading and anti-theft component replacement.
Launch X-Prog 3 Features:
1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/writing EEPROM, on-board MCU and for BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading for BMW engine ISN code.
2. Supported brands: for AUDI, for SKODA,for  SEAT,for  BMW,for  MERCEDES-BENZ, for TOYOTA, etc. More models continue to be updated.
3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.
4. Compatible with: X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII
5. Reads & writes most Engine/Gearbox E/CUs without disassembling the shell
Launch X-Prog 3 Advantages:

1. Supports for AUDI MQB platform engine E/CU  replacement or cloning (Read engine E/CU data directly from the key).
2. Supports for AUDI MQB platform gearbox E/CU replacement or cloning.
3. Supports E/CU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
4. Supports reading, writing & cloning the E/CU for the fourth-generation of V---W UDS engine.
5. Supports BMW E chassis 8HP gearbox E/CU reprogramming to empty.
6. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine E/CU ).

Core Functions:
1. Integrated the functions of key matching/copy, anti-theft IC reading & writing, and E/CU reading & writing, etc.
2. Supports common E/CU /MCU/EEPROM major manufacturers, with over 1200 product models, and constantly updating.
3. Supports E/CU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).
4. Supports E/CU replacement for the fourth-generation of for V---W/AUDI engine;
5. Supports E/CU replacement for the fifth-generation of for V--W/AUDI Bosch and Siemens engines.
6. Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable E/CU , and KESSY IC.
7. Supports the for BMW F and G chassis 8HP gearbox E/CU reprogramming to empty.
8. Supports the for BMW CAS4/CAS4+ module replacement.
9. Supports the E/CU cloning and replacement for BMW Siemens engines.
10. Erase the password for Mercedes-Benz engine and gearbox within 3S.
11. Add the function of calculating the password for the for Mercedes-Benz key within 1 minute.
Launch X-Prog 3 Supported Chip Brands:
It supports common mainstream E/CU MCU manufacturers, with more than 1,000 product models, and they are continuously being updated.

Supported EEPROM Brands: It supports common mainstream EEPROM manufacturers, with nearly 1,000 product models, and they are continuously being updated.

XPROG3 Operation Connection: Connection method 1: Directly connect to OBD16 for key matching, data reading and writing, etc Connection method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the immobilizer programmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic host Connection method 3: After removing the E/CU from the car, connect the anti-theft E/CU pin to the DIY slot of the immobilizer programmer through the cable to realize the data interaction between the anti-theft E/CU and the diagnostic host.

FAQ: Q1: If the X-PROG 3 can reset the ELV (electric steering column lock) on the Mercedes W169? A1: Yes, it supported Q2: Does Xprog3 support immo program A2: Yes, it does Q3: Whether X-431 PRO V7.0 can work with X-Prog 3? A3: No, it can not, it need work with X431 V 8inch and above X431 Scanner.

Specification

Interface

DB26, DB15

Input Power

DC12V

Working CurrentMax

500mA

Power Consumption

5W

Storage Temperature

-20℃~70℃

Working Temperature

0℃~50℃

Size

228*120 mm

 

PaymentDelivery detailsTerms of salesAbout usContact usPayment 1.We accept Credit cards、Debit card、Apple Pay、Google Pay etc. payment. 2.Please contact us if you need to use another method to pay. 3.Payment should be made within 4 days after bidding ends. 4.Otherwise an Unpaid Item case will be opened to you. 5.We are not responsible for buyers’ local taxes. 6.Please include your special requests in eBay note if there is any.  7.We reserve the final right of selling Delivery details

Shipping

Order will be shipped within 1 business day after payment confirmed.

We have warehouse in USA,UK,HongKong,Australia,Russian,Germany and China warehouse.

From our US/UK/RU/DE/AU warehouse via USPS UPS or DHL eCommerce shipping

Delivery time varies from 2 to 6 business days.

From our China warehouse via UPS DHL or Fedex

Delivery time varies from 5-12 business days.

We will ship according to your payment address.

Please make sure it is correct and include phone number for delivery.

If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem.

Please include your special requests in eBay note if there is any.

Terms of sales

We are authorize distributor, our all items are 100% original and Our devices have warranty, 12 months free repair for the devices. 3 months for the accessories.

Please contact us firstly when you need warranty service.

In case an item arrives faulty, please contact us in 30 days and keep it unused.

We will instruct you on how to return and get refund or replacement.

If after 30 days, or the item has been used, we have the right to decline your claim.

Items should be returned on buyers' cost for repair or replacement.

  About us

Who We Are? We are specialized dealer of On-Board Diagnostic tools and automotive electronics for more than 10 years. We are authorized first class distributor of Launch, Autel, Ausdom, Caska and Ehang brands, and more brands will be show in our store in near future. What Do We Have? We have office and warehouse in Australia and US to ensure fast shipment and after-sale service. We have more than 50 employees devoting to customer satisfaction. Terms of tax: We are not responsible for buyer's local taxes, please consult your local Customs for tax details.

  Contact us

Our customer-oriented service strives for positive feedbacks with all 5 star selling ratings. Please feel free to contact us via eBay message once you have any question before you giving us negative feedback or open case. We will reply in 24 business hours. Business time: GMT8 (9:00-18:00) from Monday to Friday.

  • Condition: New
  • Model: X-PROG3 Key Programmer
  • Brand: LAUNCH
  • Type: intelligent diagnostic scanner
  • Manufacturer Part Number: X431 PRO5 V+ PRO3S+ PAD V
  • OBD Interface: CAN, EOBD, OBD, OBDII
  • Connectivity: Wi-Fi/BT/USB
  • Supported System: ABS, DPF, EPB, SAS, SRS, TPMS, Engine, Auto Transmission, Airbags, Immobilizer, Key Coding, Cruise Control, Instruments, Tire Pressure
  • Vehicle Type: Passenger Vehicle, Heavy Duty/Commercial
  • Warranty: 1 Year
  • Features: Topology mapping, Guided function, Auto VIN, Actuation Test, Coding, Programming, Remote diagnosis, J2534, D-PDU, DoIP, CAN FD, ADAS Calibration, Osciloscope, Larger memory
  • Display: 13.3-inch
  • Resolution: 1920*1080
  • Battery: 71140mWh
  • VCI Connector: SmartLink C
  • Advantages 1: J2534 Programming
  • Advantages 2: Programming & Coding
  • Advantages 3: Topology Module Mapping
  • Advantages 4: Guided function for VW and AUDI

PicClick Insights - LAUNCH X431 PAD VII XPROG3 Car Diagnostic Scanner Tool IMMO Key Programming TPMS PicClick Exclusive

  •  Popularity - 8 watchers, 0.0 new watchers per day, 569 days for sale on eBay. Super high amount watching. 1 sold, 9 available.
  •  Best Price -
  •  Seller - 194+ items sold. 2.4% negative feedback. Top-Rated Plus! Top-Rated Seller, 30-day return policy, ships in 1 business day with tracking.

People Also Loved PicClick Exclusive