Seller: tich_8929✉️(2,882)99.9%,
Location:Herndon, Virginia, US,
Ships to: WORLDWIDE & many other countries,
Item:145253224613EMERGENCY ESCAPE BREATHING APPARATUS, SURVIVAIR EBA-10 PERMISSIBLE TEN MINUTE.
EMERGENCY ESCAPE BREATHING APPARATUS
SURVIVAIR EBA-10
PERMISSIBLE 10 MINUTES COMPRESSED AIR BREATHING APPARATUS ITEM INFORMATION SURVIVAIR EBA 10 MINUTE ESCAPE BREATHING APPARTUS
Every second counts.
That's why Sperian has designed an advanced emergency
Survivair Escape Breathing Apparatus (EBA-10)
that's so easy to use, it can be donned and functioning in
seconds.
The Survivair EBA-10 supplies five or ten minutes of
emergency breathing air, giving your workers the time they
need to safely escape from toxic or oxygen-deficient
atmospheres.
Versatile Carry Pouch for Added Convenience.
The Survivair EBA-10 is composed of a refillable cylinder,
valve and pressure gauge assembly, breathing tube, protective
air hood, and regulator. The assembled device is fully
contained in a versatile carry pouch.
Constructed of a tough coated nylon, this pouch has a hook and
pile closure for immediate access to the hood and on/off valve.
It also features an adjustable, single slip strap which allows
you to carry the unit in three comfortable positions: around
the neck, over the shoulder, or around the waist.
Fits Easily Over Eyeglasses, Full Beards, and Hardhats.
One of the biggest problems people have with the hoods of escape
breathing units is getting them quickly over bulky eyeglasses,
full beards, and hardhats.
The Survivair EBA-10 easily solves this problem. With one
simple adjustment, our large-opening, flexible hood offers a
proper fit to wearers.
An elastic drawstring provides a secure neck seal for minimum
leakage and maximum protection.
Besides a good fit, our hood also offers durability and resistance
to temperature extremes. Made of clear Tuftane film, its operating
temperatures are from 0°F to 160°F. A permanent anti-fog film
laminated inside the hood ensures maximum visibility. A High Flow EBA
For situations that call for an EBA with a higher air flow,
Sperian offers its Survivair EBA-HF5. It features a 5-minute,
15 cubic foot, light weight aluminum cylinder and a
regulator that delivers air to the hood at the higher flow
rate of 72 liters per minute. All other components are the
same as our standard EBAs.
Lightweight Cylinders Take a Load Off
Your Workers
Our low pressure five- and ten-minute cylinders are
constructed of lightweight aluminum, making them easier
to handle. They can be reused by simply refilling them with
air. An easy on/off control valve provides a full flow of air
with a quick turn of the regulator control knob.
Features and Benefits
Feature Benefit
5- or 10-minute duration Both assemblies utilize commonality of parts, so they're easily interchangeable
Hood equipped with elastic drawstring Designed for easy donning — especially over eyeglasses, full beards, or hardhats
and large, adjustable opening Provides a proper fit with one quick adjustment
Drawstring ensures secure neck seal for minimum outboard leakage
Resistance to temperature extremes State-of-the-art materials enable safe, NIOSH-approved operation in temperatures
from 0°F to 160°F
Anti-fog film is permanently laminated to inside panel of hood Ensures maximum visibility for an unobstructed view in all directions
Anti-fog film does not have to be re-coated each time the hood is used,
and it can easily be cleaned with soap and water
Constant flow rate over entire duration of unit Provides known air flow for emergency escape
Spring-reinforced breathing tube Prevents kinking of tube so air flow won't be restricted or cut off
Muffles air noise for quiet operation.
Detachable regulator Makes maintenance and cleaning a snap
Refillable cylinders Can utilize a cascade system or standard compressor
May be reused over and over again
Lightweight aluminum cylinder construction Reduces wearer fatigue
Abrasion-resistant, fully encapsulating nylon carry pouch Holds entire assembly, and keeps it clean and dry
The gauge can be viewed without opening the pouch
Hook and pile closure provides easy access to hood and on/off valve
Adjustable straps allow wearer to carry device in three positions:
around the neck, over the shoulder, or around the waist
Wide, 1-1/2 -inch straps on harness assembly Provides a secure, comfortable fit when worn
Optional storage case Can be wall-mounted or used to transport the unit. Specifications
EBA-5 EBA-10 EBA-HF5
Weight (Full Charge) 6.5 lbs. 8.5 lbs. 9.3 lbs.
Size (Package) 4.5 x 12.5 in. .4.5 x 16 in. 4.5 x 18.5 in.
Flow Rate 42 LPM 32 LPM 72 LPM
Cylinder Pressure 2216 psi 3000 psi 3000 psi
Hood Type Drawstring Drawstring Drawstring
Hood Material Polyurethane Film Polyurethane Film Polyurethane Film
Cylinder Type 3AL (8CF) 3AL (13CF) 3AL (15CF)
Operating Temperature, Degrees F Zero to +160 Zero to +160 Zero to +160
Carry Pouch Type Fully Enclosed 3 Pos. Strap Fully Enclosed 3 Pos. Strap Fully Enclosed 3 Pos. Strap
Regulator Adj. Flow Balanced Piston Type Adj. Flow Balanced Piston Type Adj. Flow Balanced Piston Type
Breathing Tube Low Temp. Elastomer Low Temp. Elastomer Low Temp. Elastomer
Hood Connector Molded Nylon Molded Nylon Molded Nylon
Carrying Case Blow Molded Polyethylene Blow Molded Polyethylene —
Unit Part Number 975080 975090 975190
Cylinder Part Number 975081 975091 975154